CX3: bypass raw10 image to PC

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

Hi~

   

 

   

Can I know to use CX3065 on my project.

   

I will use OV sensor and the image(raw 10bit) is bypassed to PC. 

   

I know CX3's total maximum bandwidth is 2.4Gbps.

   

I think I can under FPS and image sensor. 

   

Please check this.

   

 

   

1280 x 720 raw10 180fps

   

: 1650 x 750 x 10 x 180 = 2.2275Gbit/s

   

 

   

1920 x 1080 raw10 90fps

   

: 2200 x 1125 x 10 x 90 = 2.2275Gbit/s

   

 

   

If image size(included horizontal and vetical blanking)*FPS is under 2.4Gbps, can I used this chip?

   

 

   

 

   

have a nice day~

0 Likes
2 Replies
KandlaguntaR_36
Moderator
Moderator
Moderator
25 solutions authored 10 solutions authored 5 solutions authored

Yes, you can use the CX3 if the image size is under 2.4 Gbps.

   

Since you are transferring raw10 to the PC, the general UVC host applications (E-Cam, AMcap, Vlc ) can't stream the video. You must use a host application that process raw10 and display the video.

0 Likes
Anonymous
Not applicable

~~

   

The output format of my sensor is raw10. Is there any solution such as adding some hardware to make the general UVC host applications display the video normally? Thanks

0 Likes