1 Reply Latest reply on Dec 14, 2016 8:50 PM by gsns

    Nand flash ecc error correction

    stevesmith_2096821

      We are currently using the S34ML08G101TFI000 with an stm32f767 and appears to work well.

         

      We are using hardware ECC providing 1b per 512 bytes. For the above device we rd/wr in 512byte blocks generating an ECC for each block and storing the 4 ECC's in the spare memory.

         

      My question; Is 1b per 512 adequate for the S34ML08G101TFI000. 

         

      We can move to 1b per 256 bytes but i am not sure this is necessary?

         

      Thanks

         

      Steve