1 2 Previous Next 23 Replies Latest reply on Nov 24, 2014 11:24 PM by vavc

    Windows 8 driver - CY7C68013A

    taisuke.sudo
              I need driver for windows 8 for device cy7c68013a-56pvxc. Is there driver for this device ? There is a description of the driver of Windows7 in the following URL. Can we use the same driver ? http://www.cypress.com/?app=forum&id=167&rID=44581   
        • 1. Re: Windows 8 driver - CY7C68013A
          prajith.cheerakkoda

           Hi,

             

             You can use cyusb3.sys.

             

          http://www.cypress.com/?rID=57990

          Please go to above mentioned link and download " Cypress SuperSpeed USB Suite Installer (32-bit Windows host driver), v1.2 " for 32 bit Windows 8.

          Download " Cypress SuperSpeed USB Suite Installer (64-bit Windows host driver), v1.2 " for 64 -bit windows 8.

          After installing go to the following path "\Cypress USBSuite \driver\bin\win7 directory" and change PID and VID in the inf file. You should write PID and VID of FX2LP .
          Same is mentioned in the driver programming reference manual doc.

          Its x86 for 32 bit system and x64 for 64 bit system. 

             

          -PRJI

          • 2. Re: Windows 8 driver - CY7C68013A
            taisuke.sudo
                    Thanks for the answer.   
            I'll try.   
            • 3. Re: Windows 8 driver - CY7C68013A
              ye.chao

                HI,

                 

                Is CYUSB3.SYS compatible with cy7c68013a device?? 

              • 4. Re: Windows 8 driver - CY7C68013A
                david.wang

                I am about to try this new signed driver with my CY7C68013A device. The USB3.SYS manual states that USB2.0 is supported. The driver is signed with four pairs of VID and PID. Neither of them is the default VID/PID pair for CY7C68013A (VID=04B4, PID=8613).  Does that mean that we can use these VID and PID pairs for our own products so that we can save the cost for driver signing? 

                • 5. Re: Windows 8 driver - CY7C68013A
                  gaya

                   Hi 

                     

                   

                     

                  CYUSB3.sys is compatble with FX2LP (CY7C68013) as well. But regarding the queries regarding the VID/PID for custo products, this link might answer : http://www.cypress.com/?id=4&rID=33410.

                     

                   

                     

                  Regards,

                     

                  Gayathri

                  • 6. Re: Windows 8 driver - CY7C68013A
                    thinker.the

                    Hi,

                       

                    The driver does not only support usb2.0 controller, but can also be used with the applications built on Suite USB 3.4.7 library.
                    i.e. the applications built on cyusb.sys library (cyusb.dll) will also recognize devices attached to Cyusb3.sys.

                    Or one can say that fx2lp bound to cyusb3.sys can communicate with the applications built for cyusb.sys (Of course if you are not reffering to the GUID of the driver in the application).

                       


                    Njoy..

                    • 7. Re: Windows 8 driver - CY7C68013A
                      pierre.lam
                              Hi Please anyone help me. I have a problem with the 1.2.2 version of this driver when i pass some tests with Windows Driver Verifier, with USB3 port (win8 64 OS). The following command line "verifier /volatile /adddriver CyUSB3.sys" with device unplug/plug action causes a BSOD with these infos : ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* DRIVER_VERIFIER_IOMANAGER_VIOLATION (c9) The IO manager has caught a misbehaving driver. Arguments: Arg1: 000000000000023e, A driver has marked an IRP pending but didn't return STATUS_PENDING. Arg2: fffff880017ee34c, The address in the driver's code where the error was detected. Arg3: fffff980059e2ab0, IRP address. Arg4: ffffffffc00000bb, Status code. Debugging Details: ------------------ BUGCHECK_STR: 0xc9_23e DRIVER_VERIFIER_IO_VIOLATION_TYPE: 23e FAULTING_IP: slap+234c fffff880`017ee34c 488bc4 mov rax,rsp FOLLOWUP_IP: slap+234c fffff880`017ee34c 488bc4 mov rax,rsp Do you please have any idea on this issue? Where should I modify the sys src code to resolve my problem? Thanx PierreL   
                      • 8. Re: Windows 8 driver - CY7C68013A
                        nikhil.naik
                                There has been an update of driver and SDK for FX3 as well. Please check with the updated driver and SDK if the problem is not already solved. You can even create a Tech support case for faster resolution.   
                        • 9. Re: Windows 8 driver - CY7C68013A
                          sina.ghaffari

                          Hi

                             

                          I did everything about installing the driver ( changing vid pid ...forcing windows to install driver and ...)

                             

                          but I still get this massage:

                             

                          This device cannot start. (Code 10)

                          A request for the USB device descriptor failed.

                             

                           

                             

                          could you help me with this plz ? 

                          • 10. Re: Windows 8 driver - CY7C68013A
                            vavc

                            Hi ,

                               

                             

                               

                            Uninstall all the drivers that were used to bind the device and try with the attached drivers. Are using the CY3684 DVK or your own board?

                               

                             

                               

                            Regards,

                               

                            Vikas.

                            • 11. Re: Windows 8 driver - CY7C68013A
                              vavc

                               Hi ,

                                 

                               

                                 

                              Uninstall all the drivers that were used to bind the device and try with the attached drivers. Areyou using the CY3684 DVK or your own board?

                                 

                               

                                 

                              Regards,

                                 

                              Vikas.

                              • 12. Re: Windows 8 driver - CY7C68013A
                                vavc

                                 Hi ,

                                   

                                 

                                   

                                Couldn't able to attach the drivers. Please download the CYUSB3 drivers from the following link http://www.cypress.com/?rID=83110. (folder name " USB-Serial Windows Vendor Class Driver").

                                   

                                 

                                   

                                Regards,

                                   

                                Vikas.

                                • 13. Re: Windows 8 driver - CY7C68013A
                                  sina.ghaffari

                                  thank you for your answer...

                                     

                                  Im using my own development board . I downloaded the file you said and used win8 x64 driver.

                                     

                                  it didnt work ... after installing the driver it says : windows has finished installing the driver.

                                     

                                  but there is still an exclamation mark for this device.

                                     

                                  in device status it says :This device cannot start. (Code 10)

                                  A request for the USB device descriptor failed.

                                     

                                  is there anything I can do?

                                  • 14. Re: Windows 8 driver - CY7C68013A
                                    vavc

                                     HI ,

                                       

                                     

                                       

                                    Is your board working in windows 7, xp and vista?

                                       

                                     

                                       

                                    Please create a tech support case http://www.cypress.com/support

                                       

                                    One of our engineers will assist you regarding this.

                                       

                                     

                                       

                                    Regards,

                                       

                                    Vikas

                                       

                                         

                                     

                                    1 2 Previous Next