13 Replies Latest reply on May 5, 2017 6:18 AM by user_1377889

    Using UART to transmit data converted by ADC

    milinds.747_1696896

      I am doing this as  my masters' project. I started from scratch by making a plotter. That part is done and works okay. For acquiring data I am using CY8C3866AXI-040. I am able to convert using ADC. The problem I face is I am unable to receive transmitted data. I used TeraTerm initially to check if the data is being received before further processing it, I got nothing. The schematic of the kit provided is attached below. I attach this assuming the possibility of incorrect pin entered in cydwr file. The number of samples transmitted will depend on the adjustment of time/div setting on the PC. So the number of samples transmitted will vary. How do I use the Rx interrupt to do that?  What addition should be made to the program to transmit the converted data?