1 Reply Latest reply on Apr 29, 2017 4:45 AM by userc_38694

    USB Bulk transfer on HID class FM4 Core

      Hello,

         

      I am developing a device using s6e2cc core and USB1 device feature. My device will replace an older one, that has USB connection with PC using HID class and a custom dirver. The custom driver uses 4 endpoints. CTRL R/W endpoints (that I was able to let them works, even not perfectly) and BULK R/W endpoints. I am not able to see any interrupt when HOST try a BULK transfer. Can anyone help me on how to configure a Bulk endpoint? I use USB Wizard software to build a basic HidCom device.

         

      Thank you

         

      Ivan

        • 1. Re: USB Bulk transfer on HID class FM4 Core

          Hello Ivan.,

             

          Have you solved USB issue , Even I am also in the same loop what you are. If you got any solution I hope you can help me . I am getting so many errors when I compile the USB example generated by usb wizard.

             

          If possible can you send me one basic working USB example so that I can customize as per requirement. 

             

          Thank you.,

             

          Best Regards.

             

          Karthik..