- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi, I have designed a PCB board with CYBLE-214009 module and need to program and debug the module with SWD interface.Two pins are assigned for programming and debuging P0[7] (SCLK)and P0[6](SDAT) respectively on board. I am not able to program the module on custom pcb board. I am using PSOC MINIPROG3 PROGRAM AND DEBUG KIT.
Pins assigned in BLE module with MINIPROG3 PROGRAM AND DEBUG KIT:-
1 - VDD
2- GND
3- XRES
4- SCLK P0[7]
5- SDAT P0[6]
Solved! Go to Solution.
- Labels:
-
BLE
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please have a look at http://www.cypress.com/knowledge-base-article/troubleshooting-psoc-345lp-programmingdebugging-issues...
Thanks,
Hima
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi, I have designed a PCB board with CYBLE-214009 module and need to program and debug the module with SWD interface.Two pins are assigned for programming and debuging P0[7] (SCLK)and P0[6](SDAT) respectively on board. I am not able to program the module on custom pcb board. I am using PSOC MINIPROG3 PROGRAM AND DEBUG KIT.
Pins assigned in BLE module with MINIPROG3 PROGRAM AND DEBUG KIT:-
1 - VDD
2- GND
3- XRES
4- SCLK P0[7]
5- SDAT P0[6]
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please have a look at http://www.cypress.com/knowledge-base-article/troubleshooting-psoc-345lp-programmingdebugging-issues...
Thanks,
Hima