It should be part of the Creator install (or maybe PSoC Programmer).
I already install anything (complete installation) with DVD ISO.
I can use CY8CKIT-042-BLE-A Bluetooth® Low Energy 4.2 Compliant Pioneer Kit as before with the installation.
So it is very strange....
Is there a way to restore KitProg of the board? I think that the KitProg maybe corrupt....
After restoring KitProg, it still no driver associates with KitProg...
I notice that my another computer(WIN10 64Bit) can detect driver and install, how to fix in WIN7 64Bit?
Try to update the Kitprog as shown in the manual using PSoC Programmer 3.25
I already restore KitProg many times by using PSoC Programmer 3.25..., the result is the same.
Hold down the Reset button for 10 Sec and see if that helps.
Drivers for Kit prog are in the kit prog dir.
Hi, I already restore KitProg of the board and reinstall the driver many times...
But ONLY the CY8CKIT-042 Kit can be properly detected and installed driver.
CY8CKIT-046 is still not working...
Have you re-installed the Psoc Creator on the windows 7 machine. That should reinstall all of the software. If it fails to work the I would say that there is some kind of software issue with the windows 7 machine as it works on the windows 10 system.
I reinstall PSOC Creator 3.3 and 4.0, WIN7 machine doesn't show any errors and problems.
By the way, CY8CKIT-046 Mouse Demo (J11 USB Port) is also no driver to use, but WIN10 machine can properly install driver to use.
Solve problem by upgrading WIN7 with Original DVD.