This content has been marked as final. Show 3 replies
You do realize that RSSI is the Received Signal Strength Indicator, right? It has nothing whatsoever to do with your TX power.
What TX power level are you trying to set to? The 43362 power detector linearity is only from ~10-20dBm. However as you know the WICED platform is not capable of outputting 20dBm. Also the RSSI reading on the AP is a ball park number and takes bigger changes in recieve power to move the reading, i.e. the AP is not going to really change if you are only moving TX power by 1dBm. There can also be other factors that effect the RSSI not just pure tx power. Try moving the WICED platform further from your AP just to be sure that the AP is correctly reporting RSSI.