You need Cypress Creator 4.0 SP1 as the latest version.
Updating the Kitprog to latest is also required. It is not necessary to select the device family in PSoC programmer, this info is taken from the hex-file you want to flash.
Ok, plot thickens.
"Log file for this session is located at: C:\Users\msillanpaa\AppData\Local\Temp\PSoC Creator-001.log Warning: Port KitProg/1B150EEB02105400 in use KitProg version Expecting 2.17, but found 2.16. Please use PSoC Programmer GUI to upgrade firmware."
The Programmer Still doesn't contain the right family. And the "Upgrade Firmware" -button in the "Utilities" -page isn't active.
Follow the instructions in the Kitprog manual to update:
- insert Kit
- start programmer
- select kitprog
- wait until check via internet for actual version displays
- select "Utility" and update