3 Replies Latest reply on Jan 25, 2017 7:47 AM by user_1377889

    Psoc programmer doesn't contain device family for cy8ckit-046

    matti.sillanpaa_2239071

      Hi.

         

       

         

      I've got Psoc 4 l-series pioneer kit and I'm trying to use the UART USB example (this SDK http://www.cypress.com/documentation/development-kitsboards/cy8ckit-046-psoc-4-l-series-pioneer-kit)

         

      The UART communication wasn't responding in any way so I started going trough the kitprog user guide for this kit (http://www.cypress.com/file/226201/download).

         

      I've used the PSoC Creator ( 3.3 SP1 (3.3.0.7343)) for flashing and debugger works fine.

         

      The kitprog user guide however mentioned updating the firmware for the kitprog and that's not working. If I start up the PSoc  programmer (3.25.0.2504) it doesn't contain the CY8C4xxx -family. Should I be able to upgrade the firmware via this tool or is the info in the documentation obsolete? Or is the problem the CCG3 SDK that I had installed before (I uninstalled it before installing this).