Could any body tell me the usage of this .exe file? (which is attached with the mail & also the link is given).
A) They are the low level drivers for Cypress Serial NOR and Parallel NOR devices.
The Low Level Driver contains all of the device-specific logic that manages Flash command presentation and Flash status:
• The Serial Low Level Driver (SLLD) supports the full range of Cypress serial peripheral interface Flash, providing the
industry’s first FFS for Serial Interface devices!
• The Low Level Driver (LLD) supports Cypress parallel interface Flash, through the older polling
interface, or the newer status register interface; and the LLD enables multiple board layouts, supporting both cascaded and interleaved layouts for various data bus widths.
The SLLD contains both higher-level “operation” functions and low-level “command” functions. The operation functions
implement programming operations, erase operations and protect operations.
Please extract the file , go to DOC folder and go through "SPI Low _Level_ Drivers" pdf file which explaind about all the functions and how to port them.
Can this tool helps in generating LLD (Low Level Driver), BD(Bloack Driver) and FFS(Spansion Flash File system code) for the S25FL512S?
A) No it will not generate LLD,BD and FFS.
if not is there any tool helps in generating LLD (Low Level Driver), BD(Bloack Driver) and FFS(Spansion Flash File system code) for the S25FL512S in MCU(STM32F03291RC)?
A) No there is no tool to generate LLD,BD and FFS.