This content has been marked as final. Show 3 replies
Hello i am trying to run a PWM module with a 48 Mhz clock frequency.
I am using the IMO; and i set the clock at 48 Mhz. This is not working, and i can only measure 3 Mhz with my oscilloscope.
As the IMO is 3 Mhz, i figure that i need to do something else to get the 48 Mhz, described in this document:
How can i get the 48 Mhz from the clock?
My project is attached. The clock i want to be 48 Mhz is the Clock_PWM.
Hope someone can help.