1 Reply Latest reply on Apr 16, 2013 6:37 PM by jasonrc
      • 1. Re: What are the "remote cdc header return error codes" for wl & mfg_test?
        Error codes are available from <WICED-SDK>/Apps/test/mfg_test/src/include/bcmutils.h

         

        Copied below for reference...

         

         

        #define BCME_OK    0 /* Success */
        #define BCME_ERROR   -1 /* Error generic */
        #define BCME_BADARG   -2 /* Bad Argument */
        #define BCME_BADOPTION   -3 /* Bad option */
        #define BCME_NOTUP   -4 /* Not up */
        #define BCME_NOTDOWN   -5 /* Not down */
        #define BCME_NOTAP   -6 /* Not AP */
        #define BCME_NOTSTA   -7 /* Not STA  */
        #define BCME_BADKEYIDX   -8 /* BAD Key Index */
        #define BCME_RADIOOFF    -9 /* Radio Off */
        #define BCME_NOTBANDLOCKED  -10 /* Not  band locked */
        #define BCME_NOCLK   -11 /* No Clock */
        #define BCME_BADRATESET   -12 /* BAD Rate valueset */
        #define BCME_BADBAND   -13 /* BAD Band */
        #define BCME_BUFTOOSHORT  -14 /* Buffer too short */
        #define BCME_BUFTOOLONG   -15 /* Buffer too long */
        #define BCME_BUSY   -16 /* Busy */
        #define BCME_NOTASSOCIATED  -17 /* Not Associated */
        #define BCME_BADSSIDLEN   -18 /* Bad SSID len */
        #define BCME_OUTOFRANGECHAN  -19 /* Out of Range Channel */
        #define BCME_BADCHAN   -20 /* Bad Channel */
        #define BCME_BADADDR   -21 /* Bad Address */
        #define BCME_NORESOURCE   -22 /* Not Enough Resources */
        #define BCME_UNSUPPORTED  -23 /* Unsupported */
        #define BCME_BADLEN   -24 /* Bad length */
        #define BCME_NOTREADY   -25 /* Not Ready */
        #define BCME_EPERM   -26 /* Not Permitted */
        #define BCME_NOMEM   -27 /* No Memory */
        #define BCME_ASSOCIATED   -28 /* Associated */
        #define BCME_RANGE   -29 /* Not In Range */
        #define BCME_NOTFOUND   -30 /* Not Found */
        #define BCME_WME_NOT_ENABLED  -31 /* WME Not Enabled */
        #define BCME_TSPEC_NOTFOUND  -32 /* TSPEC Not Found */
        #define BCME_ACM_NOTSUPPORTED  -33 /* ACM Not Supported */
        #define BCME_NOT_WME_ASSOCIATION -34 /* Not WME Association */
        #define BCME_SDIO_ERROR   -35 /* SDIO Bus Error */
        #define BCME_DONGLE_DOWN  -36 /* Dongle Not Accessible */
        #define BCME_VERSION   -37  /* Incorrect version */
        #define BCME_TXFAIL   -38  /* TX failure */
        #define BCME_RXFAIL   -39 /* RX failure */
        #define BCME_NODEVICE   -40  /* Device not present */
        #define BCME_NMODE_DISABLED  -41  /* NMODE disabled */
        #define BCME_NONRESIDENT  -42 /* access to nonresident overlay */