It should be convertible to the PRoC. Try taking the sample and just changing the device to the PRoC device that you are using, and see if that will build/compile.
The PRoC has timers and watchdog timers, and thus should be able to implement an RTC easily. The only question is how accurate it will be. Worst case, it shouldn't be too hard to implement a similar solution based off of the ECO.
Let me know if you get it working, or if you need help on it :)
Sorry for newbie questions ;)
How do I change the saample to match my PRoC (CYBLE -022001-00)?
I'm going to experiment with the Day45 source and let you know
Thanks for your help.
Many more questions ahead :)
Ok I figured out how to change the device
For project RTC PSoC4 XTAL ( that implements RTC) I got an error "Error in component ..Comparator Comp_P4_v1_20 is not supported by the selected device"
Also, make sure all of the components and versions are up to date in the project. (Right click the project, and select "Update Components")
I thought the PRoC contained a LP Comparator? I could have been mistaken :(