2 Replies Latest reply on May 3, 2017 6:44 AM by ferhatyol_2020106

    Using DMA with Control Register

    ferhatyol_2020106

      Hi

         

      I am using Control Register to write data to GPIO. I have to send a array to GPIO continuously. Size of array is 1Kbyte. I want to use DMA for Data Transfer. How do I write control register address to DMA for this?

         

      I also need a DMA interrupt. I need to generate a clock signal after each transfer data of the DMA. If the DMA transfer size is 1024 Bytes, I need 1024 interrupt. Because I need to generate a clock signal after writing data to the GPIO.

         

      How can I do this with DMA?

         

      Thank You