2 Replies Latest reply on Apr 23, 2017 8:13 PM by nathan_1783536

    Where is the SCB_Bootloader project?

    nathan_1783536

      Hi all

         

       

         

      Working with a Psoc CY8CKIT-049-42 development kit. I am following the "getting started" video with Alan Hawes, and have installed the 15.4mb file with all of the documentation and example projects. I cannot for the life of me find the Boatloader example referenced in this video. Where is it supposed to be located? This has been incredibly frustrating, and Im sure I am making a simple error.....
      I am going to New - Project - selecting the target hardware - Code Examples
      There is no SCB_Bootloader project. And the 2 Bootloader based examples are completely different. 

      Any ideas?

        • 1. Re: Where is the SCB_Bootloader project?
          nathan_1783536

          Okay, still no idea what Im doing wrong. My PSCO Creator install in fine, and I am using a PSOC 5lp kit without incident. But I cannot find the files to load code onto the 4200. Can someone point me in the right direction? Thanks!

          • 2. Re: Where is the SCB_Bootloader project?
            user_1377889

            Your Kit -049 is pre-programmed with a bootloader and without a miniprog3 this cannot be altered.

               

            When programming a bootloadable project you need to refer to the .elf and .hex files. These have been installed on your PC when you installed the -049 kit files. Look for Program files (x86)\Cypress\CY8CKIT-049-..... and descend into the shadows... mine is

               

            C:\Program Files (x86)\Cypress\CY8CKIT-049-42xx\1.0\Firmware\SCB_Bootloader\UART_Bootloader.cydsn\CortexM0\ARM_GCC_484\Debug

               

             

               

            Bob