4 Replies Latest reply on Jun 21, 2017 5:57 AM by user_274318315

    AN65974 fails to build?

    user_274318315

      From http://www.cypress.com/documentation/application-notes/an65974-designing-ez-usb-fx3-slave-fifo-interface

         

      Her's what I get at the link stage using the latest (1.3.3) SDK:

         
      arm-none-eabi-ld cyfxslfifosync.o cyfxslfifousbdscr.o --entry CyU3PFirmwareEntry -L ../../../fw_lib/1_3_3/fx3_debug -lcyu3sport -lcyu3lpp -lcyfxapi -lcyu3threadx "$ARMGCC_INSTALL_PATH"/arm-none-eabi/lib/libc.a "$ARMGCC_INSTALL_PATH"/lib/gcc/arm-none-eabi/4.8.1/libgcc.a  -T ../../../fw_build/fx3_fw/fx3_512k.ld -d --gc-sections --no-wchar-size-warning -Map cyfxslfifosync.map -o cyfxslfifosync.elf ../../../fw_lib/1_3_3/fx3_debug\libcyfxapi.a(cyu3entry_armcc.o): In function `CyU3PFirmwareEntry': e:\views\antioch_fx3_build_view_puri\software\products\usb30\sdk\firmware\src\system/cyu3entry_armcc.S:131: undefined reference to `CyU3PToolChainInit' ../../../fw_lib/1_3_3/fx3_debug\libcyfxapi.a(cyu3system.o): In function `CyU3PSysCheckBootState': cyu3system.c:(i.CyU3PSysCheckBootState+0x68): undefined reference to `CyU3PMemCopy' R:\apps\cypress\EZ-USB FX3 SDK\1.3\ARM GCC\bin\arm-none-eabi-ld.exe: cyfxslfifosync.elf: hidden symbol `CyU3PMemCopy' isn't defined R:\apps\cypress\EZ-USB FX3 SDK\1.3\ARM GCC\bin\arm-none-eabi-ld.exe: final link failed: Bad value make: *** [makefile:35: cyfxslfifosync.elf] Error 1 
         

      TAIA.

        • 1. Re: AN65974 fails to build?
          nisa

          1) Can you download a fresh copy and try to build it again. I check and it builds at my end

             

          2) I suppose you have install SDK 1.3.3, if not, please update. Have you tried re-installing the SDK?

             

          3) Rest of the SDK firmware are able to build? Only this firmware is not building? 

             

          4) Please attach one building SDK project so that we can see your working setting.

          • 2. Re: AN65974 fails to build?
            user_274318315

            Thanks Nishant. Where are you unzipping the archive? If I unzip in the firmware folder of the 1.3.3 SDK then the firmware makefile cannot find defaults: 

               
            R:\apps\cypress\EZ-USB FX3 SDK\1.3\firmware\AN65974\FX3 Firmware\SlaveFifoSync>make makefile:22: ../../common/fx3_build_config.mak: No such file or directory make: *** No rule to make target '../../common/fx3_build_config.mak'.  Stop.
               

            If I adjust paths then I get the errors shown in my original posting. Below is a listing showing one  of  the basic examples being built correctly.

               

             

               
            R:\apps\cypress\EZ-USB FX3 SDK\1.3\firmware\basic_examples\cyfxbulksrcsink>make arm-none-eabi-gcc -g -DTX_ENABLE_EVENT_TRACE -DDEBUG -DCYU3P_FX3=1 -D__CYU3P_TX__=1 -I. -I../../../fw_lib/1_3_3/inc  -O0 -Wall -mcpu=arm926ej-s -mthumb-interwork -ffunction-sections -fdata-sections -c -o cyfxbulksrcsink.o cyfxbulksrcsink.c  arm-none-eabi-gcc -g -DTX_ENABLE_EVENT_TRACE -DDEBUG -DCYU3P_FX3=1 -D__CYU3P_TX__=1 -I. -I../../../fw_lib/1_3_3/inc  -O0 -Wall -mcpu=arm926ej-s -mthumb-interwork -ffunction-sections -fdata-sections -c -o cyfxbulkdscr.o cyfxbulkdscr.c arm-none-eabi-gcc -g -DTX_ENABLE_EVENT_TRACE -DDEBUG -DCYU3P_FX3=1 -D__CYU3P_TX__=1 -I. -I../../../fw_lib/1_3_3/inc  -O0 -Wall -mcpu=arm926ej-s -mthumb-interwork -ffunction-sections -fdata-sections -c -o cyfxtx.o cyfxtx.c arm-none-eabi-gcc  -Wall -c -mcpu=arm926ej-s -mthumb-interwork -o cyfx_gcc_startup.o cyfx_gcc_startup.S arm-none-eabi-ld cyfx_gcc_startup.o cyfxbulksrcsink.o cyfxbulkdscr.o cyfxtx.o --entry CyU3PFirmwareEntry -L ../../../fw_lib/1_3_3/fx3_debug -lcyu3sport -lcyu3lpp -lcyfxapi -lcyu3threadx "$ARMGCC_INSTALL_PATH"/arm-none-eabi/lib/libc.a "$ARMGCC_INSTALL_PATH"/lib/gcc/arm-none-eabi/4.8.1/libgcc.a  -T ../../../fw_build/fx3_fw/fx3_512k.ld -d --gc-sections --no-wchar-size-warning -Map cyfxbulksrcsink.map -o cyfxbulksrcsink.elf  R:\apps\cypress\EZ-USB FX3 SDK\1.3\firmware\basic_examples\cyfxbulksrcsink>
            • 3. Re: AN65974 fails to build?
              rghe

              Hi,

                 

              You can unzip the archive in any folder. I suppose, you have created your Eclipse Workspace. Please make sure that you have checked the option "Copy projects into workspace" while importing this project into Eclipse workspace.

              • 4. Re: AN65974 fails to build?
                user_274318315

                Hi rghe, Sadly I don't use Eclipse, all of this gets driven by 'make' in a command shell.