kit prog not detected

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

i have windows 7(32bit) in my laptop with latest psoc programmer version.When i plug the kitprog its not detected properly,one entry is under "PORTS" section and its detected fine.other is under "Universal serial bus controller" section and entry for kitprog with yellow symbol.my psoc programmer version is latest and i don't install other software as i only need this to program hex file.so in this second section driver is not properly detected.i try to update driver automatically but it say best driver is already installed and also try to update it by manual path "C:programefiles/cypress/psoc programmer/driver/kitprog" but its not working. how to resolve this issue?

0 Likes
1 Solution
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Try pressing the reset switch on the Kitprog for more than 10 seconds.

   

 

   

Bob

View solution in original post

0 Likes
1 Reply
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Try pressing the reset switch on the Kitprog for more than 10 seconds.

   

 

   

Bob

0 Likes