The objective of this post is to install hostapd on the ARM target and ready to go for its use. This post explains the instructions on how to setup dependent hostapd libraries and cross-compile the s...
Context: The ModusToolbox™ ecosystem leverages content from GitHub respositories for drivers, middleware, BSP targets, and other run-time software assets. Due to geographical restrictions, GitH...
MEMS microphone specifications
1. Introduction
As the name implies, the heart of a MEMS microphone is a micro-electro-mechanical system (MEMS) transducer. Microphones work by converting sound...
Question: When do I need Python for a ModusToolbox application? Do I need to install Python?
Answer: Various ModusToolbox™ applications require Python. These include applications that involve MCUBo...
What is DESAT?
DESAT - is the desaturation (DESAT) protection feature that is present in automotive gate drivers. The following diagrams illustrate how DESAT protection works:
Figure 1:&...
...re frequently used to calculate junction temperature in steady state in a known thermal environment. This is explained in detail in a number of publications, including AN-1057: www.irf.com/t...
How to change DHCP client hostname in WICED and ModusToolbox SDK?
This article explains how to set a desired name as the DHCP host name in WICED and ModusToolbox. The client's DHCP hostnam...
Infineon XMC MCU comes with many useful code example projects, which make it easy to design applications for customer projects. Some code example projects had their Build Configuration set to R...
Before you start the A2DP stream, issue the vendor specific command “Write_A2DP_Connection “(OGF =0x3F, OCF =0x11A)from the host to controller. Note that the device should be in Controller mode befor...
After installing the evaluation kit software downloaded from Infineon website, and while having the PGSISI 2 interface powered and connected to the host machine PC via USB-cable, the GUI is unable to...