cancel
Showing results for 
Search instead for 
Did you mean: 

Wireless

GlJe_1688511
New Contributor II

Hello case.

 

For KC certification, I need the firmware for carrier frequency, modulated RF output and etc.

I used the PSoC4 BLE MTK firmware at PSoC4 BLE.

Do you have the MTK for PSoC6 BLE?

 

Please check it.

 

Thanks and Best regards.

Glenn.

0 Likes
11 Replies
Yugandhar
Moderator
Moderator

Hello,

Please find the attached project. Please let me know if this helps.

Thanks,
P Yugandhar.

0 Likes
GlJe_1688511
New Contributor II

Hello P Yugandhar.

What PSoC Creator version Is the project file used on?

Thanks

Glenn. 

0 Likes
GlJe_1688511
New Contributor II

Hello P Yugandhar.

I tried to open the project, but, the project wasn't opened.

GlJe_1688511_0-1619481018537.png

Thanks.

Glenn.

0 Likes
Yugandhar
Moderator
Moderator

Hello,

Could you please try the below attached project ?

Thanks,

P Yugandhar.

0 Likes
GlJe_1688511
New Contributor II

Hello P Yugandhar.

I attached the project and error capture.

GlJe_1688511_0-1619653283670.png

 

I copy the ble_hal.a from other project.

GlJe_1688511_1-1619653341412.png

 

'.\ble_hal.a: file not recognized: File format not recognized' error occurred.

 

Thanks and Best regards.

Glenn.

0 Likes
Yugandhar
Moderator
Moderator

Hello, 

Please refer to the attached project. 

Thanks,

P Yugandhar.

0 Likes
GlJe_1688511
New Contributor II

Hello P Yugandhar.

GlJe_1688511_0-1620029673944.png

Doesn't the error occur on your site?

The error still occurs on my site.

Thanks and Best regards.

Glenn.

0 Likes
Yugandhar
Moderator
Moderator

Hello,

I'm not seeing any error at my end. Could you please use the latest PDL and check once ?

Thanks,

P Yugandhar.

0 Likes
GlJe_1688511
New Contributor II

Hello P Yugandhar.

I am using the PDL 3.1.4.

GlJe_1688511_0-1620279105420.png

Thanks and Best regards.

Glenn.

0 Likes
GlJe_1688511
New Contributor II

Hello P Yugandhar.

Does your project folder have the 'ble_hal.a'?

If you have it, please attach only the file(ble_hal.a).

Thanks and Best regards.

Glenn.

 

0 Likes
NaAm_1281831
New Contributor

Hi Yughandhar,

 We use the BLE Module CYBLE-022001-00 in our application, and we need the similar test software to run MTK RF TESTS.  Please provide me the project files that is good for the BLE Module CYBLE-022001-00 .

Thanks,

Naga.

0 Likes