Question about MTK Transmit Packets test

[user_2208511]

Our customer use CYBLE-212020 in their design. This project is passing NCC certification，and one of test item is Transmit Packets,  need BLE device continue TX 90sec. Customer use MTK app to transmit packets but the packets number limited to 65535, so TX will stoped at 89% of whole test and test failed.

Do we have any way to make packet number not be limited or at least continue more than 90sec？

[Owen_Zhang123]

Please try to set the number of packets to -1 which means indefinite transmission.

[user_2208511]

Hi Owen:

Thanks, I have tried to set number to -1, but it not take effect, number of packet will turn to 0...

[Owen_Zhang123 · Accepted solution]

Please refer to the following KBA: https://community.cypress.com/t5/Knowledge-Base-Articles/Test-Firmware-for-PSoC-PRoC-BLE-RF-Certific...

It includes the test project and test guide.