- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
We have a certification for Japan coming up soon and we have been struggling with the BCMDHD driver. U-blox, the manufacturer of the package/product we are using have helped us as much as they can. As far as they can see, things should work for us but they don't. The driver fails during the probe.
However, we have had some success with the brcmfmac driver for normal operation. For the certification we need access to the MFG firmware so we can enable the TX CW test modes etc.
Who can I contact or where can I find it?
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I managed to contact cypress and got information that the MFG firmware from the bcmdhd package should work for testing purposes. They have however not tested/verified this but early testing on our part shows good results.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I managed to contact cypress and got information that the MFG firmware from the bcmdhd package should work for testing purposes. They have however not tested/verified this but early testing on our part shows good results.