Showing results for 
Search instead for 
Did you mean: 

WICED Studio Wi-Fi Combo

Not applicable


I'm new to WICED IDE programming, i installed the WICDE IDE and 3.1.0 SDK.

Building the snip.scan BM943362WCD4 is ok.

but to start debugging and (extern) run the project.

I get

Downloading Bootloader ...

"**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"

FTDI drivers are installed. this is a windows 7 64 bit computer.

openocd-all-brcm-libftdi.exe is in de sdk.

in openocd_log.txt i get the following.

Open On-Chip Debugger 0.8.0-dev-00139-g4dfe8d5-dirty (2013-08-22-12:22)

Licensed under GNU GPL v2

For bug reports, read

Info : only one transport option; autoselect 'jtag'

trst_and_srst separate srst_nogate trst_push_pull srst_push_pull connect_assert_srst

adapter speed: 1000 kHz

adapter_nsrst_delay: 100

jtag_ntrst_delay: 100

Warn : target name is deprecated use: 'cortex_m'


Error: unable to open ftdi device: device not found

Runtime Error: ./tools/OpenOCD/stm32f2x-flash-app.cfg:10:

in procedure 'script'

at file "embedded:startup.tcl", line 58

in procedure 'init' called at file "./tools/OpenOCD/stm32f2x-flash-app.cfg", line 10

3 Replies