- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
factory mode document(WICED-AN800-R-Factory-Programming.pdf) run and checked.
SDK 3.1.2 is normal behavour.
But, I'm used develop SDK 3.5.2.
SDK 3.5.2 is not work dct set value.
factort_reset_dct run step.
1.temp_control,mk add "GLOBAL_DEFINES := MAC_ADDRESS_SET_BY_HOST"
2.make demo.temp_control-BCM9WCDPLUS114
3.make demo.temp_control-BCM9WCDPLUS114 factory_reset_dct Apps\demo\temp_control\mfg\0001.txt
4.set JTAG_CFG=./tools/OpenOCD/BCM9WCD1EVAL1.cfg
5.set MCU_CFG=./Tools/OpenOCD/stm32f2x.cfg
6.set FLASH_CFG=./Tools/OpenOCD/stm32f2x-flash-app.cfg
7. .\Tools\OpenOCD\Win32\openocd-all-brcm-libftdi.exe -f %JTAG_CFG% -f %MCU_CFG% -f %FLASH_CFG% -c "flash write_image erase build/waf.bootloader-NoOS-BCM9WCDPLUS114/binary/waf.bootloader-NoOS-BCM9WCDPLUS114.elf" -c shutdown
8. .\Tools\OpenOCD\Win32\openocd-all-brcm-libftdi.exe -f %JTAG_CFG% -f %MCU_CFG% -f %FLASH_CFG% -c "flash write_image erase build/demo.temp_control-BCM9WCDPLUS114/binary/demo.temp_control-BCM9WCDPLUS114.elf" -c shutdown
9. .\Tools\OpenOCD\Win32\openocd-all-brcm-libftdi.exe -f %JTAG_CFG% -f %MCU_CFG% -f %FLASH_CFG% -c "flash write_image erase build/demo.temp_control-BCM9WCDPLUS114/factory_reset/factory_reset_dct_0001.elf" -c shutdown >> build/openocd_log.txt 2>&1 && echo Download complete && "./Tools/common/Win32/echo.exe" || echo "**** Download failed ****"
app download run but, dct value is not set.
If you ever changed SDK3.5.2 factory mode?
How to Run SDK3.5.2 factory mode?
This issue is very important.
I want SDK3.5.2 used resolve solution