Wi-Fi Combo Forum Discussions
Hello
I'm having trouble with breakpoints not working as expected during debugging.
Compile, start debugging, create breakpoint, start, do these in order
Stop at "WICED / platform / MCU / STM32F4xx / peripherals / platform_gpio.c: 113". This is not correct.
Please let me know if you know a solution for debugging in the expected position.
The implementation environment is as follows.
・ Chip model: CYW43438
・ SDK: WICED-Studio-6.4
Thank you
Show Less
Hello.
I use the following function to get the credentials needed to connect to the router..
Is there a way to stop the processing of this function from the outside?
function: wiced_wps_enrollee()
Thank you.
Show LessHello experts,
We have created a project on WICED 43xx_Wi-Fi sdk for STM32F412 MCU+43438 wlan chip.
We have downloaded the make target such as "snip.scan-<platform_name> download run" to target platform successfully. When I tried to download the debugger to platform using "snip.scan-<platform_name>-debug download" and using st-link to debug. There are some error message showing:
*****************************************************************************************************************************************************************************************************
Downloading Bootloader ...
"**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"
Downloading DCT ...
"**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"
Downloading Application ...
"**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"
Build complete
Making .gdbinit
16:36:23 Build Finished (took 31s.710ms)
****************************************************************************************************************************************************************************************************
In devcie manager I can see the STM32 STLink and WICED USB serial port showing, means I connected both USB port and STlink debugger to the EVB.
I have attached the openocd_log.txt.
Please help for clarifying this issue and if need anything information please let me know.
Your help will be appreciated.
Thanks.
BR,
Wayne
Show LessHi all
Recently, i try to plant wiced6.4 ble firmeware use chip CYW43438A1,and used only low_energy mode not dual_mode,when i plant success and try to test it,CYW43438A1operates as a central and connects to a peripheralfind, it can not connected to CYW20706A1,when connected it auto disconnected rapidly,the disconnect reason is :0x16,also the MTU didn't get;
but when I use mobile phone or chip CYW20736 it connect ok and communicat well.
the connect api set as :
wiced_bt_gatt_le_connect (conn_param->bd_addr.mac_addr,
ble_mac_type,
BLE_CONN_MODE_HIGH_DUTY,
TRUE);
the other connect paprmeter set as:.security_requirement_mask = BTM_SEC_NONE,
.conn_min_interval = 24
.conn_max_interval =40
.conn_latency = 0
.conn_supervision_timeout = 700,
thanks!!!
MichaelF_56broadcomwiced-admin
Show LessHello.
How can I make a secure connection using TLS1.2 with the MQTT library?
(wiced_mqtt_init()、wiced_mqtt_connect()、wiced_mqtt_publish() etc...)
Thank you.
Show LessI am trying to connect the CYW to an Enterprise network using peap after loading the test.console app on the device. Ive replaced the root cert in certificate.h and run the join_ent command:
joint_ent MYSSID peap MYUSER MYPASSWORD wpa2
Just returns an empty console input. Using the same SSID in the join command at least lets me know that it has failed to connect.
The credentials I'm using do work as I have used my a couple of computers both be able to join using them.
Not entering the correct number of arguments does at least return an "INSUFFICIENT ARGUMENTS" error.
Is there anything else I should try?
Show LessAnswer: Call 'wwd_wifi_set_iovar_value' with "vhtmode" 0
Hi Sir,
At present, the WIFI module in our factory uses 100-100-0698R. The poor Tx EVM test results this time have caused our bad yield to have specific date codes
The bad focus is on TxEVM-F5320-R54, and TxEVM-F5805-R54 cpk is not good ,But our test station only has the value written by VERIFY cypress, so we want to know that the value written by cypress will affect our TX EVM,Also , can you provide these actual values for a specific DATE CODE to follow SPEC??
Br,
DS 12/09
Show Less(I transcribed here what I wrote to the Community Information.)
Hello.
If a WPS connection is executed using the following functions, it will stop with an error.
Please tell me the cause and countermeasure.
Function used: wiced_wps_enrollee ()
Error stop function:
wps_result_t wps_host_join (void * workspace, wps_ap_t * ap, wwd_interface_t interface)
{
~ Omitted
ret = (wps_result_t) wwd_wifi_join_specific (& ap-> scan_result, NULL, 0, & semaphore, interface
Omitted
if (wwd_wifi_is_ready_to_transceive (interface)! = WWD_SUCCESS)
{
→ Error stop WPS_ERROR (("Failed to join WPS at interface% u \ r \ n", (unsigned int) interface));
Thank you.
Show LessHi,
1) Our company is currently evaluating wifi/bluetooth combo modules to integrate into one of our designs. I have the CY8CPROTO-062-4343W module and have downloaded modulus studio. Our biggest concern is how well the module works with Wifi bluetooth and BLE running at the same time. Is there any example code utilizing all 3 that I could run to evaluate the module?
2) secondly, were looking at using the https://wireless.murata.com/type1ld.html module which integrates the CYW4343W, I noticed that it doesnt have HFP implemented by default and I'm wondering if it would be possible to implement HFP (since the 1LD module has a built in MCU, perhaps the bluetooth protocol could be hosted on the MCU and we could implement HFP ourselves?)
Thanks
Show Less