- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have been reading the discussions on the forum about OTA and OTA2 updates.
If I am not wrong, OTA2 is currently not available for BCM94343W
OTA example in snip folder makes use of a web server where the user picks the new firmware image.
Are there also examples for automatic updates (WITH OTA) where the app connects to a server and downloads the image automatically?
OTA2 example works like that but it's unfortunately not available for BCM94343W.
thanks
rifo
Solved! Go to Solution.
- Labels:
-
Over The Air Updates (OTA)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello folks,
the problem was faulty hardware. Tried a new board and both Ota_fr and tftp snip examles work now.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Find similar trial ftp example.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello darius1
thanks a lot for the heads up. I setup a tftp client on my PC and tried the example. The connection is fine but I got below error from
wiced_result_t snip_tftp_write( tftp_t* tftp, uint8_t* data, void* p_user ) function. I will try to find the problem.
Error Writing
Writing size 512 from offset 102912 [0xfd]
Error Writing
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello folks,
the problem was faulty hardware. Tried a new board and both Ota_fr and tftp snip examles work now.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Do you can test your ota_fr or tftp with bigger in size firmware file? New firmware must bigger >=4096 bytes.
Do you can it test 10 times (always need increase new firmware size >=4096)?
This not simple test. Maybe need do in code an used data array and increase it size 4096 and compile 10 times. Then you give 10 firmware files, each bigger. Now you can do firmware upgrade test 10 times. Need begun from smallest file .... to biggest.