- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
We just started working on STM32F412,and we want to use our existing IAR project on STM32F411, which does not has wifi.
STM32F412 has both wifi and BT. So now we are porting our old project to WICED.
It turns out that latest WICED is using old version of HAL than that used in our existing project,Hence we wanted to know is
there any plan to upgrade HAL in future WICED release ?
Attached the libraries,
Old : libraries.7z
New : STM32F4xx_HAL_Driver.7z
Thanks,
Suresh
Solved! Go to Solution.
- Labels:
-
WICED Studio
-
Wifi+Bluetooth
-
Wireless MCU
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Unfortunately there is no plan to upgrade the HAL layer in WICED as it would involve significant engineering effort to do so across several platforms.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Unfortunately there is no plan to upgrade the HAL layer in WICED as it would involve significant engineering effort to do so across several platforms.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The latest STM32F4xx Standard Peripherals Drivers does not change a lot.
It mainly adds support for new STM32F413xx and STM32F423xx devices.
If WICED want to add support for STM32F413xx and STM32F423xx devices, you will have to upgrade the peripherals drivers anyway.