WICED Studio Wi-Fi Combo

[Anonymous]

I am trying to implement a USB 2.0 host for a custom class on a CYW54907 wireless SoC (CYW943907AEVAL1F dev board). I would like to connect the host to a custom class on a USB device running on an FX3 module (CYUSB3KIT-003 EZ-USB® FX3™ SuperSpeed Explorer Kit).

I am using USBX dpump to create a custom class on the host (see attached code). I also added dpump to the event handler in wiced_usb.c (attached). On the FX3 device, I am running the default BulkLoopAutoCpp example. I have also tried running the MouseDemo on FX3.

I cannot get the custom DPUMP class to work. I notice that when I plug the device in, the event callback function (wiced_usb_host_usbx_host_evt_callback) in wiced_usb.c does not trigger. I suspect the reason is that the UX_HOST_CLASS class instance NULL? I get the same result when I test with default USBBulkSourceSinkLED example on FX3 (the LED doesn't even light up). Here is the terminal debug terminal output from this test:

+-------------------------------------------------+

+ USB20 Host DPUMP Custom Class Application       +

+-------------------------------------------------+

> USB20 Host init starting...

Detected board strapping is in USB-PHY mode!!

Detected board is in USB Host mode!!

USB Host support 2 HCI resource

USB20 Host init completed!!!

#UX#: Device:

. State: 1

. Address: 1

. HCD name: ux_hcd_ehci

. Class name: (null)

. Speed: 2 (HIGH)

. Port Index: 0

. Max Power: 250

loopback

+++START: DPUMP custom class loopback started

*** Please input any key from your terminal program ***

DPUMP == NULL

---END: DPUMP test

I also checked the MouseDemo with the same host – it enumerates as an HID device, and successfully executes the event callback function (see red). (It also prints data successfully when run with hid_keyboard host app). Here is the terminal output:

+-------------------------------------------------+

+ USB20 Host DPUMP Custom Class Application       +

+-------------------------------------------------+

> USB20 Host init starting...

Detected board strapping is in USB-PHY mode!!

Detected board is in USB Host mode!!

USB Host support 2 HCI resource

USB20 Host init completed!!!

Entering event call

#UX#HostClassHid#: event UX_DEVICE_INSERTION

#UX#HostClassHid#: Found Keyboard HID Class device

RETURN TO MAIN APP EVENT HANDLER------------------- (1)

USB20 Host: event (1)

USB20 Host: unknown event (1)

#UX#: Device:

. State: 3

. Address: 1

. HCD name: ux_hcd_ohci

. Class name: (null)

. Speed: 0 (LOW)

. Port Index: 0

. Max Power: 250

Could you please assist me in getting a custom class to work?

Many thanks in advance.

riya​mifo​hsoleimani_2959646​ anyu​

[Anonymous]

Hi,

We too noticed a issue with USBX DPUMP class and are checking with expresslogic currently., I will update you on further developments.

Regards,

-Madhu

[Anonymous]

Thanks. In the mean time, are there any other code examples for transferring raw data over two bulk endpoints that I could use? I need high speed, so do not want to use a virtual COM port.

[Anonymous]

I have meet the same issue, do you have any progress? thanks.

[MichaelF_56]

Adding the applications team anpm​ grsr​ gyan​ riya​ rroy​ shjl​ wwfe​

[AxLi_1746341]

Madhu Lakshmipathy confirmed the issue 8 months ago.

I notice now it usually takes very long time to get bug fixes of the sdk, this is not good.

[AxLi_1746341]

Madhu Lakshmipathy wrote:

Hi,

We too noticed a issue with USBX DPUMP class and are checking with expresslogic currently., I will update you on further developments.

Could you elaborate a bit about the issue with USBX DPUMP class?

Any update for the fix?

[JaLi_1762176]

Sorry,  our custoemr has meet same issue.

for fix issue, could you have any update status

[MichaelF_56]

Please create a new thread as I'm not sure the Applications Team is monitoring these older threads.