cancel
Showing results for 
Search instead for 
Did you mean: 

WICED Studio Wi-Fi Combo

Mario
New Contributor

Hello,

we have to build up a test board for our customer which shall be equipped with a Murrata Type 1PS (Type 1PS | LBWA1UZ1PS | Murata Manufacturing Co., Ltd.) module. This module includes your Cypress CW54907 chipset.

For the project we just have to proof that the chip is working. So our goal is to get a connection to a known network and command a ping request.

Do you provide any standard pre-compiled application which we can use as a so called network controller offering the ability to issue commands by a serial interface e.g. UART? If yes, can you provide us any documents which give us an impression about the complexity of such an interface.

 

Best regards,
Mario

 

0 Likes
1 Solution
MuraliR_36
Moderator
Moderator

You can take a look at snip.apsta example.

This connects to a network, pings the gateway and starts a softAP.

This can be a good starting point

View solution in original post

0 Likes
1 Reply
MuraliR_36
Moderator
Moderator

You can take a look at snip.apsta example.

This connects to a network, pings the gateway and starts a softAP.

This can be a good starting point

View solution in original post

0 Likes