cancel
Showing results for 
Search instead for 
Did you mean: 

WICED Studio Wi-Fi Combo

garc_3476631
New Contributor II

Using and Configuring CY8CKIT 062 WI-FI BT connected to W10 laptop. The display is,not entering DEMO MODE. Ive followed the Qick Start Guide .. no Display on Screen.

Both development environments were download.

Any suggestions?

My concern is the kit was damaged during its shipment

0 Likes
21 Replies
PriyaM_16
Moderator
Moderator

The board comes with a default project loaded into it. Was the TFT display showing the demo example details when you first powered up the board? Are you seeing a blank white screen instead? If you are seeing white screen, the board is atleast powering up and we need to flash another application that displays content on the TFT display.

I hope you are familiar with the demo project given here:

http://www.cypress.com/documentation/code-examples/ce222494-psoc-6-wiced-wifi-demo

I would still request you to flash the demo as mentioned in the link.

0 Likes
garc_3476631
New Contributor II

Hello Riya,

Yes, that is what I am experiencing. When connected to laptop .....

Yes Blank = White Display.

Seems in a stuck mode. Thiis should be resolved in 5 minutes. Do advise

0 Likes
PriyaM_16
Moderator
Moderator

Ca you tell me the WICED version you are using?

I just tried the CE222494_PSoC6_WICED_WiFi-CY8CKIT_062 application with WICED 6.2 SDK and I could see the contents on TFT display.

0 Likes
garc_3476631
New Contributor II

Hello Riya,

Not using WICED software. default configurations ........ Following the Quick Start Guide Insert that shipped with the KIT. Remember the DEMO mode once worked. Just applied power. Now connect to W10 Home, Laptop by USB .....  Nothing, Blank White screen. What would you do next ?

0 Likes
garc_3476631
New Contributor II

Hello Riya,

I found a 120Vac power to USB adapter

Plug in to AC outlet.

Connect supplied USB Type ??? Cable to the KIT.

Still the display is White. Now ascii text or blinking cursor.

What would you do next?

0 Likes
PriyaM_16
Moderator
Moderator

Can you please program the board with WICED ?

0 Likes
garc_3476631
New Contributor II

I tried that. Does not work. The kit is not recognized on the W10 USB port. Also Teraterm 4.101 has serisl port grayed out.

So I know believe the KIT is defective.

After unboxing the KIT in June and simply applying power the TFT display did display the DEMO, etc.

The KIT has not worked June.

Have time now to continue. ...

What next ?

0 Likes
garc_3476631
New Contributor II

wHERE IS DOCUMENT 43xxx_Wi-Fi/doc/WICED-QSG.pdf ?

0 Likes
PriyaM_16
Moderator
Moderator

The QSG is in WICED SDK at 43xxx_Wi-Fi/doc/WICED-QSG.pdf

pastedImage_2.png

garc_3476631
New Contributor II

Hello Community,

I installed the drivers and can now see KitProg2 on USB Port ....

reinstall WICED "Wicked" ?? .. Ha, Ha.  for the third time ... uninstall of course .......

Following contents of  CE222494.zip

reading and implementing...  CE222494_PSoC_6_WICED_WiFi_Demo.pdf

Make the .c or .h .... cant remember from previous employment ...

Make ends immediately ... Errors ...

Here is log ....

!SESSION 2018-12-26 01:44:47.582 -----------------------------------------------

eclipse.buildId=4.4.2.M20150204-1700

java.version=1.8.0

java.vendor=Oracle Corporation

BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US

Framework arguments: -product org.eclipse.epp.package.cpp.product

Command-line arguments: -os win32 -ws win32 -arch x86 -product org.eclipse.epp.package.cpp.product

!ENTRY org.eclipse.mylyn.wikitext.context.ui 4 0 2018-12-26 01:46:42.025

!MESSAGE FrameworkEvent ERROR

!STACK 0

org.osgi.framework.BundleException: Could not resolve module: org.eclipse.mylyn.wikitext.context.ui [327]

  Unresolved requirement: Require-Bundle: org.eclipse.mylyn.wikitext.ui; bundle-version="2.0.0"

at org.eclipse.osgi.container.Module.start(Module.java:434)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.incStartLevel(ModuleContainer.java:1582)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.incStartLevel(ModuleContainer.java:1561)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.doContainerStartLevel(ModuleContainer.java:1533)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.dispatchEvent(ModuleContainer.java:1476)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.dispatchEvent(ModuleContainer.java:1)

at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:230)

at org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run(EventManager.java:340)

!ENTRY org.eclipse.mylyn.wikitext.tasks.ui 4 0 2018-12-26 01:46:42.099

!MESSAGE FrameworkEvent ERROR

!STACK 0

org.osgi.framework.BundleException: Could not resolve module: org.eclipse.mylyn.wikitext.tasks.ui [336]

  Unresolved requirement: Require-Bundle: org.eclipse.mylyn.wikitext.ui; bundle-version="2.0.0"

at org.eclipse.osgi.container.Module.start(Module.java:434)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.incStartLevel(ModuleContainer.java:1582)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.incStartLevel(ModuleContainer.java:1561)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.doContainerStartLevel(ModuleContainer.java:1533)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.dispatchEvent(ModuleContainer.java:1476)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.dispatchEvent(ModuleContainer.java:1)

at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:230)

at org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run(EventManager.java:340)

!ENTRY org.eclipse.egit.ui 2 0 2018-12-26 01:54:00.119

!MESSAGE Warning: EGit couldn't detect the installation path "gitPrefix" of native Git. Hence EGit can't respect system level

Git settings which might be configured in ${gitPrefix}/etc/gitconfig under the native Git installation directory.

The most important of these settings is core.autocrlf. Git for Windows by default sets this parameter to true in

this system level configuration. The Git installation location can be configured on the

Team > Git > Configuration preference page's 'System Settings' tab.

This warning can be switched off on the Team > Git > Confirmations and Warnings preference page.

!ENTRY org.eclipse.egit.ui 2 0 2018-12-26 01:54:00.126

!MESSAGE Warning: The environment variable HOME is not set. The following directory will be used to store the Git

user global configuration and to define the default location to store repositories: 'C:\Users\gramsay035'. If this is

not correct please set the HOME environment variable and restart Eclipse. Otherwise Git for Windows and

EGit might behave differently since they see different configuration options.

This warning can be switched off on the Team > Git > Confirmations and Warnings preference page.

!ENTRY org.eclipse.cdt.core 4 0 2018-12-26 02:12:12.602

!MESSAGE Error: Encountered an ambiguous node "sizeof(_CharT)" at C:\Users\gramsay035\Documents\WICED-Studio-6.2\43xxx_Wi-Fi\tools\ARM_GNU\Win32\arm-none-eabi\include\c++\7.2.1\bits\regex_compiler.h, line 536 while parsing C:\Users\gramsay035\Documents\WICED-Studio-6.2\43xxx_Wi-Fi\tools\ARM_GNU\Win32\arm-none-eabi\include\c++\7.2.1\regex

!STACK 0

org.eclipse.cdt.internal.core.parser.ParserException: Encountered an ambiguous node "sizeof(_CharT)" at C:\Users\gramsay035\Documents\WICED-Studio-6.2\43xxx_Wi-Fi\tools\ARM_GNU\Win32\arm-none-eabi\include\c++\7.2.1\bits\regex_compiler.h, line 536 while parsing C:\Users\gramsay035\Documents\WICED-Studio-6.2\43xxx_Wi-Fi\tools\ARM_GNU\Win32\arm-none-eabi\include\c++\7.2.1\regex

at org.eclipse.cdt.internal.core.dom.parser.ASTAmbiguousNode.logAmbiguousNodeError(ASTAmbiguousNode.java:182)

at org.eclipse.cdt.internal.core.dom.parser.ASTAmbiguousNode.getEvaluation(ASTAmbiguousNode.java:177)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTBinaryExpression.computeEvaluation(CPPASTBinaryExpression.java:277)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTBinaryExpression.getEvaluation(CPPASTBinaryExpression.java:268)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTBinaryExpression.computeEvaluation(CPPASTBinaryExpression.java:277)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTBinaryExpression.getEvaluation(CPPASTBinaryExpression.java:268)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTUnaryExpression.computeEvaluation(CPPASTUnaryExpression.java:186)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTUnaryExpression.getEvaluation(CPPASTUnaryExpression.java:177)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTBinaryExpression.computeEvaluation(CPPASTBinaryExpression.java:277)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTBinaryExpression.getEvaluation(CPPASTBinaryExpression.java:268)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPFunction.getReturnExpression(CPPFunction.java:700)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPFunction.getReturnExpression(CPPFunction.java:678)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPFunction.getReturnExpression(CPPFunction.java:707)

at org.eclipse.cdt.internal.core.dom.parser.cpp.semantics.EvalFunctionCall.computeForFunctionCall(EvalFunctionCall.java:247)

at org.eclipse.cdt.internal.core.dom.parser.cpp.semantics.EvalFunctionCall.getValue(EvalFunctionCall.java:149)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPTemplateNonTypeArgument.<init>(CPPTemplateNonTypeArgument.java:38)

at org.eclipse.cdt.internal.core.dom.parser.cpp.semantics.CPPTemplates.createTemplateArgumentArray(CPPTemplates.java:2012)

at org.eclipse.cdt.internal.core.dom.parser.cpp.semantics.CPPTemplates.createBinding(CPPTemplates.java:761)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTTemplateId.createIntermediateBinding(CPPASTTemplateId.java:124)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTNameBase.resolvePreBinding(CPPASTNameBase.java:94)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTQualifiedName.resolvePreBinding(CPPASTQualifiedName.java:100)

at org.eclipse.cdt.internal.core.dom.parser.ASTAmbiguousNode.doResolveAmbiguity(ASTAmbiguousNode.java:126)

at org.eclipse.cdt.internal.core.dom.parser.ASTAmbiguousNode.resolveAmbiguity(ASTAmbiguousNode.java:83)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTAmbiguityResolver.visit(CPPASTAmbiguityResolver.java:64)

at org.eclipse.cdt.internal.core.dom.parser.ASTAmbiguousNode.accept(ASTAmbiguousNode.java:66)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTTemplateId.accept(CPPASTTemplateId.java:184)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTQualifiedName.accept(CPPASTQualifiedName.java:260)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTNamedTypeSpecifier.accept(CPPASTNamedTypeSpecifier.java:92)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTSimpleDeclaration.accept(CPPASTSimpleDeclaration.java:102)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTCompositeTypeSpecifier.accept(CPPASTCompositeTypeSpecifier.java:200)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTSimpleDeclaration.accept(CPPASTSimpleDeclaration.java:102)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTTemplateDeclaration.accept(CPPASTTemplateDeclaration.java:123)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTNamespaceDefinition.accept(CPPASTNamespaceDefinition.java:139)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTNamespaceDefinition.accept(CPPASTNamespaceDefinition.java:139)

at org.eclipse.cdt.internal.core.dom.parser.ASTTranslationUnit.accept(ASTTranslationUnit.java:266)

at org.eclipse.cdt.internal.core.dom.parser.cpp.CPPASTTranslationUnit.resolveAmbiguities(CPPASTTranslationUnit.java:193)

at org.eclipse.cdt.internal.core.dom.parser.AbstractGNUSourceCodeParser.resolveAmbiguities(AbstractGNUSourceCodeParser.java:673)

at org.eclipse.cdt.internal.core.dom.parser.AbstractGNUSourceCodeParser.parse(AbstractGNUSourceCodeParser.java:661)

at org.eclipse.cdt.core.dom.parser.AbstractCLikeLanguage.getASTTranslationUnit(AbstractCLikeLanguage.java:167)

at org.eclipse.cdt.internal.core.pdom.AbstractIndexerTask.createAST(AbstractIndexerTask.java:1229)

at org.eclipse.cdt.internal.core.pdom.AbstractIndexerTask.parseFile(AbstractIndexerTask.java:1086)

at org.eclipse.cdt.internal.core.pdom.AbstractIndexerTask.parseLinkage(AbstractIndexerTask.java:932)

at org.eclipse.cdt.internal.core.pdom.AbstractIndexerTask.runTask(AbstractIndexerTask.java:554)

at org.eclipse.cdt.internal.core.pdom.indexer.PDOMIndexerTask.run(PDOMIndexerTask.java:161)

at org.eclipse.cdt.internal.core.pdom.indexer.PDOMRebuildTask.run(PDOMRebuildTask.java:90)

at org.eclipse.cdt.internal.core.pdom.PDOMIndexerJob.run(PDOMIndexerJob.java:149)

at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)

!ENTRY org.eclipse.cdt.core 1 0 2018-12-26 02:13:20.562

!MESSAGE Indexed '43xxx_Wi-Fi' (2,603 sources, 5,446 headers) in 753 sec: 731,343 declarations; 2,794,124 references; 639 unresolved inclusions; 13,672 syntax errors; 72,488 unresolved names (2%)

!SESSION 2018-12-26 09:15:11.775 -----------------------------------------------

eclipse.buildId=4.4.2.M20150204-1700

java.version=1.8.0

java.vendor=Oracle Corporation

BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US

Framework arguments: -product org.eclipse.epp.package.cpp.product

Command-line arguments: -os win32 -ws win32 -arch x86 -product org.eclipse.epp.package.cpp.product

!ENTRY org.eclipse.mylyn.wikitext.context.ui 4 0 2018-12-26 09:15:13.479

!MESSAGE FrameworkEvent ERROR

!STACK 0

org.osgi.framework.BundleException: Could not resolve module: org.eclipse.mylyn.wikitext.context.ui [327]

  Unresolved requirement: Require-Bundle: org.eclipse.mylyn.wikitext.ui; bundle-version="2.0.0"

at org.eclipse.osgi.container.Module.start(Module.java:434)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.incStartLevel(ModuleContainer.java:1582)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.incStartLevel(ModuleContainer.java:1561)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.doContainerStartLevel(ModuleContainer.java:1533)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.dispatchEvent(ModuleContainer.java:1476)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.dispatchEvent(ModuleContainer.java:1)

at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:230)

at org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run(EventManager.java:340)

!ENTRY org.eclipse.mylyn.wikitext.tasks.ui 4 0 2018-12-26 09:15:13.485

!MESSAGE FrameworkEvent ERROR

!STACK 0

org.osgi.framework.BundleException: Could not resolve module: org.eclipse.mylyn.wikitext.tasks.ui [336]

  Unresolved requirement: Require-Bundle: org.eclipse.mylyn.wikitext.ui; bundle-version="2.0.0"

at org.eclipse.osgi.container.Module.start(Module.java:434)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.incStartLevel(ModuleContainer.java:1582)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.incStartLevel(ModuleContainer.java:1561)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.doContainerStartLevel(ModuleContainer.java:1533)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.dispatchEvent(ModuleContainer.java:1476)

at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.dispatchEvent(ModuleContainer.java:1)

at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:230)

at org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run(EventManager.java:340)

!ENTRY org.eclipse.egit.ui 2 0 2018-12-26 09:16:14.869

!MESSAGE Warning: EGit couldn't detect the installation path "gitPrefix" of native Git. Hence EGit can't respect system level

Git settings which might be configured in ${gitPrefix}/etc/gitconfig under the native Git installation directory.

The most important of these settings is core.autocrlf. Git for Windows by default sets this parameter to true in

this system level configuration. The Git installation location can be configured on the

Team > Git > Configuration preference page's 'System Settings' tab.

This warning can be switched off on the Team > Git > Confirmations and Warnings preference page.

!ENTRY org.eclipse.egit.ui 2 0 2018-12-26 09:16:14.878

!MESSAGE Warning: The environment variable HOME is not set. The following directory will be used to store the Git

user global configuration and to define the default location to store repositories: 'C:\Users\gramsay035'. If this is

not correct please set the HOME environment variable and restart Eclipse. Otherwise Git for Windows and

EGit might behave differently since they see different configuration options.

This warning can be switched off on the Team > Git > Confirmations and Warnings preference page.

!ENTRY org.eclipse.core.resources 4 77 2018-12-26 09:18:43.258

!MESSAGE Invalid project description.

!SUBENTRY 1 unknown 0 0 2018-12-26 09:18:43.258

!MESSAGE OK

!SUBENTRY 1 org.eclipse.core.resources 4 77 2018-12-26 09:18:43.258

!MESSAGE C:\Users\gramsay035 overlaps the workspace location: C:\Users\gramsay035\Documents\WICED-Studio-6.2

Next ?????

0 Likes
garc_3476631
New Contributor II

Can anyone direct me to a working solution ?

Still theorize this KIT was defective before I received it.

0 Likes
garc_3476631
New Contributor II

16:57:32 **** Build of configuration Default for project 43xxx_Wi-Fi ****

"C:\\WICED\\SDK\\WICED-Studio-6.2\\43xxx_Wi-Fi\\make.exe" demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062 download_apps download run

MAKEFILE MAKECMDGOALS=demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062 download_apps download run OTA2_SUPPORT is disabled

Making config file for first time

+-----------------------------------------------------------------------------------------------------+

| IMPORTANT NOTES                                                                                     |

+-----------------------------------------------------------------------------------------------------+

| Wi-Fi MAC Address                                                                                   |

|    The target Wi-Fi MAC address is defined in <WICED-SDK>/generated_mac_address.txt                 |

|    Ensure each target device has a unique address.                                                  |

+-----------------------------------------------------------------------------------------------------+

| MCU & Wi-Fi Power Save                                                                              |

|    It is *critical* that applications using WICED Powersave API functions connect an accurate 32kHz |

|    reference clock to the sleep clock input pin of the WLAN chip. Please read the WICED Powersave   |

|    Application Note located in the documentation directory if you plan to use powersave features.   |

+-----------------------------------------------------------------------------------------------------+

+-----------------------------------------------------------------------------------------------------+

| IMPORTANT NOTES                                                                                     |

+-----------------------------------------------------------------------------------------------------+

| Wi-Fi MAC Address                                                                                   |

|    The target Wi-Fi MAC address is defined in <WICED-SDK>/generated_mac_address.txt                 |

|    Ensure each target device has a unique address.                                                  |

+-----------------------------------------------------------------------------------------------------+

| MCU & Wi-Fi Power Save                                                                              |

|    It is *critical* that applications using WICED Powersave API functions connect an accurate 32kHz |

|    reference clock to the sleep clock input pin of the WLAN chip. Please read the WICED Powersave   |

|    Application Note located in the documentation directory if you plan to use powersave features.   |

+-----------------------------------------------------------------------------------------------------+

MAKEFILE MAKECMDGOALS=demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062 download_apps download run OTA2_SUPPORT is disabled

Building Bootloader

Finished Building Bootloader

Creating security credentials

Building Serial Flash Loader App

MAKEFILE MAKECMDGOALS=waf.sflash_write-NoOS-CY8CKIT_062-SDIO OTA2_SUPPORT is disabled

Processing resources

Making DCT image

waf.sflash_write-NoOS-CY8CKIT_062-SDIO

----------------------------------|---------|

                                  |  Static |

              Module              |   RAM   |

----------------------------------+---------|

App                               |   21130 |

Interrupt Vectors                 |     652 |

libc                              |     556 |

Other                             |   16953 |

platform                          |    2412 |

Ring_Buffer                       |     160 |

SPI_Flash_Library_CY8CKIT_062     |    7188 |

Startup Stack & Link Script fill  |    1021 |

WWD                               |     132 |

----------------------------------+---------|

TOTAL (bytes)                     |   50204 |

----------------------------------|---------|

Build complete

Finished Building Serial Flash Loader App

Compiling App_CE222494_PSoC6_WICED_WiFi

Compiling Platform_CY8CKIT_062

apps/demo/CE222494_PSoC6_WICED_WiFi/CE222494_PSoC6_WICED_WiFi.c: In function 'application_start':

apps/demo/CE222494_PSoC6_WICED_WiFi/CE222494_PSoC6_WICED_WiFi.c:167:37: warning: '%s' directive writing up to 63 bytes into a region of size 39 [-Wformat-overflow=]

         sprintf(buffer, "Password:  %s\n", configAp->security_key);

                                     ^~

apps/demo/CE222494_PSoC6_WICED_WiFi/CE222494_PSoC6_WICED_WiFi.c:167:9: note: 'sprintf' output between 13 and 76 bytes into a destination of size 50

         sprintf(buffer, "Password:  %s\n", configAp->security_key);

         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Compiling WICED

Compiling Lib_HTTP_Server

Compiling Lib_device_configuration

Compiling Lib_SNTP

Compiling Lib_ugui

Compiling Lib_GPIO_button

Compiling Platform_ak4954_driver

Compiling WWD_ThreadX_Interface

Compiling WICED_ThreadX_Interface

Compiling WWD_for_SDIO_ThreadX

Compiling Supplicant_BESL

Compiling Lib_DNS

Compiling NetX_Duo

Compiling Lib_Wiced_RO_FS

Compiling PSoC6

Compiling Lib_Linked_List

Compiling Lib_Simple_HTTP_Server

Compiling Lib_DNS_Redirect_Daemon

Compiling Lib_TLV

Compiling Lib_base64

Compiling Lib_mbedTLS

Compiling Lib_micro_ecc

Compiling WWD_NetX_Duo_Interface

Compiling WICED_NetX_Duo_Interface

Compiling common_GCC

Compiling PSoC6_Peripheral_Drivers

Compiling Lib_Ring_Buffer

Compiling Lib_crc

Compiling Lib_DHCP_Server

Compiling PSoC6_Peripheral_Libraries

Compiling PSoC6_Peripheral_CapSense

Compiling Lib_SPI_Flash_Library_CY8CKIT_062

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/App_CE222494_PSoC6_WICED_WiFi.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Platform_CY8CKIT_062.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/WICED.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_HTTP_Server.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_device_configuration.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_SNTP.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_ugui.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_GPIO_button.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Platform_ak4954_driver.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/WWD_ThreadX_Interface.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/WICED_ThreadX_Interface.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/WWD_for_SDIO_ThreadX.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Supplicant_BESL.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_DNS.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/NetX_Duo.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_Wiced_RO_FS.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/PSoC6.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_Linked_List.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_Simple_HTTP_Server.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_DNS_Redirect_Daemon.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_TLV.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_base64.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_mbedTLS.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_micro_ecc.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/WWD_NetX_Duo_Interface.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/WICED_NetX_Duo_Interface.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/common_GCC.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/PSoC6_Peripheral_Drivers.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_Ring_Buffer.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_crc.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_DHCP_Server.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/PSoC6_Peripheral_Libraries.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/PSoC6_Peripheral_CapSense.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_SPI_Flash_Library_CY8CKIT_062.a

Making demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062.elf

Making demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062.bin

demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062

----------------------------------|---------|---------|

                                  |         |  Static |

              Module              |  Flash  |   RAM   |

----------------------------------+---------+---------|

App                               |    4922 |    1176 |

crc                               |    1060 |       0 |

device_configuration              |    3609 |      20 |

DHCP_Server                       |    1460 |     132 |

DNS                               |    2048 |      44 |

DNS_Redirect_Daemon               |     718 |       0 |

HTTP_Server                       |    3946 |       8 |

Interrupt Vectors                 |     652 |       0 |

libc                              |   32892 |    3368 |

Linked_List                       |     466 |       0 |

mbedTLS                           |  111926 |      88 |

Networking                        |    6030 |   13912 |

NetX-Duo - Interfaces & Stacks    |       0 |      16 |

NVRam                             |     640 |       0 |

Other                             |   93179 |    7625 |

Packet Buffers                    |       0 |   22470 |

platform                          |    3908 |     736 |

RAM Initialisation                |    4372 |       0 |

resources                         |   59611 |       0 |

Ring_Buffer                       |     160 |       0 |

Simple_HTTP_Server                |    1034 |       0 |

SNTP                              |     712 |      96 |

SPI_Flash_Library_CY8CKIT_062     |    1088 |     352 |

Startup Stack & Link Script fill  |     147 |      29 |

Supplicant - BESL                 |    7581 |     864 |

ThreadX                           |    8744 |     400 |

TLV                               |     214 |       0 |

ugui                              |    8052 |       4 |

WICED                             |    6006 |    1076 |

Wiced_RO_FS                       |     568 |       0 |

WWD                               |   18645 |    3208 |

----------------------------------+---------+---------|

TOTAL (bytes)                     |  380018 |   55624 |

----------------------------------|---------|---------|

Building apps lookup table

Downloading Bootloader ...

"**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"

Downloading DCT ...

"**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"

Downloading resources filesystem ... build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/filesystem.bin at sector 1  size 111...

make.exe[1]: *** [FILESYSTEM_IMAGE_DOWNLOAD] Error 1

tools/makefiles/wiced_apps.mk:334: recipe for target 'FILESYSTEM_IMAGE_DOWNLOAD' failed

make: *** [main_app] Error 2

Makefile:351: recipe for target 'main_app' failed

16:59:58 Build Finished (took 2m:25s.325ms)

0 Likes
garc_3476631
New Contributor II

Description Resource Path Location Type

recipe for target 'main_app' failed Makefile /43xxx_Wi-Fi line 351 C/C++ Problem

recipe for target 'FILESYSTEM_IMAGE_DOWNLOAD' failed wiced_apps.mk /43xxx_Wi-Fi/tools/makefiles line 334 C/C++ Problem

make: *** [main_app] Error 2 43xxx_Wi-Fi C/C++ Problem

make.exe[1]: *** [FILESYSTEM_IMAGE_DOWNLOAD] Error 1 43xxx_Wi-Fi C/C++ Problem

make.exe[1]: *** Waiting for unfinished jobs.... 43xxx_Wi-Fi C/C++ Problem

Program "make" not found in PATH snip C/C++ Problem

Invalid project path: Include path not found (43xxx_Wi-Fi\Tools\ARM_GNU\arm-none-eabi\include). 43xxx_Wi-Fi pathentry Path Entry Problem

Invalid project path: Include path not found (43xxx_Wi-Fi\Tools\ARM_GNU\include). 43xxx_Wi-Fi pathentry Path Entry Problem

0 Likes
garc_3476631
New Contributor II

Can anyone direct me to a working solution ?

Still theorize this KIT was defective before I received it.

MichaelF_56
Moderator
Moderator

Adding the applications team anpm grsr gyan riya rroy shjl wwfe

0 Likes
garc_3476631
New Contributor II

CE222494 – PSoC 6 WICED WiFi Demo

www.cypress.com Document No. 002-22494 Rev.** 1

Objective

This example demonstrates how to use a PSoC 6 MCU device to connect to a WiFi network and serve a webpage. The webpage displays the voltage of a light sensor, date and time, and controls the brightness of an LED.

FAILS at this step:

9. Double-click the newly created make target to build the code, program the kit, and run the example. Note that this may take a few minutes.

garc_3476631
New Contributor II

201x0101 - WICED 6_2 - Make Target demoCE222494_PSoC6_WICED_WiFi-CY8CKIT_062 download_apps download run - RESULT 1 ERROR.jpg

0 Likes
garc_3476631
New Contributor II

January 1, 2019

23:01:05 **** Build of configuration Default for project 43xxx_Wi-Fi ****

"C:\\WICED\\SDK\\WICED-Studio-6.2\\43xxx_Wi-Fi\\make.exe" demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062 download_apps download run

MAKEFILE MAKECMDGOALS=demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062 download_apps download run OTA2_SUPPORT is disabled

Making config file for first time

+-----------------------------------------------------------------------------------------------------+

| IMPORTANT NOTES                                                                                     |

+-----------------------------------------------------------------------------------------------------+

| Wi-Fi MAC Address                                                                                   |

|    The target Wi-Fi MAC address is defined in <WICED-SDK>/generated_mac_address.txt                 |

|    Ensure each target device has a unique address.                                                  |

+-----------------------------------------------------------------------------------------------------+

| MCU & Wi-Fi Power Save                                                                              |

|    It is *critical* that applications using WICED Powersave API functions connect an accurate 32kHz |

|    reference clock to the sleep clock input pin of the WLAN chip. Please read the WICED Powersave   |

|    Application Note located in the documentation directory if you plan to use powersave features.   |

+-----------------------------------------------------------------------------------------------------+

+-----------------------------------------------------------------------------------------------------+

| IMPORTANT NOTES                                                                                     |

+-----------------------------------------------------------------------------------------------------+

| Wi-Fi MAC Address                                                                                   |

|    The target Wi-Fi MAC address is defined in <WICED-SDK>/generated_mac_address.txt                 |

|    Ensure each target device has a unique address.                                                  |

+-----------------------------------------------------------------------------------------------------+

| MCU & Wi-Fi Power Save                                                                              |

|    It is *critical* that applications using WICED Powersave API functions connect an accurate 32kHz |

|    reference clock to the sleep clock input pin of the WLAN chip. Please read the WICED Powersave   |

|    Application Note located in the documentation directory if you plan to use powersave features.   |

+-----------------------------------------------------------------------------------------------------+

MAKEFILE MAKECMDGOALS=demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062 download_apps download run OTA2_SUPPORT is disabled

Building Bootloader

Building Serial Flash Loader App

MAKEFILE MAKECMDGOALS=waf.sflash_write-NoOS-CY8CKIT_062-SDIO OTA2_SUPPORT is disabled

Making config file for first time

+-----------------------------------------------------------------------------------------------------+

| IMPORTANT NOTES                                                                                     |

+-----------------------------------------------------------------------------------------------------+

| Wi-Fi MAC Address                                                                                   |

|    The target Wi-Fi MAC address is defined in <WICED-SDK>/generated_mac_address.txt                 |

|    Ensure each target device has a unique address.                                                  |

+-----------------------------------------------------------------------------------------------------+

| MCU & Wi-Fi Power Save                                                                              |

|    It is *critical* that applications using WICED Powersave API functions connect an accurate 32kHz |

|    reference clock to the sleep clock input pin of the WLAN chip. Please read the WICED Powersave   |

|    Application Note located in the documentation directory if you plan to use powersave features.   |

+-----------------------------------------------------------------------------------------------------+

+-----------------------------------------------------------------------------------------------------+

| IMPORTANT NOTES                                                                                     |

+-----------------------------------------------------------------------------------------------------+

| Wi-Fi MAC Address                                                                                   |

|    The target Wi-Fi MAC address is defined in <WICED-SDK>/generated_mac_address.txt                 |

|    Ensure each target device has a unique address.                                                  |

+-----------------------------------------------------------------------------------------------------+

| MCU & Wi-Fi Power Save                                                                              |

|    It is *critical* that applications using WICED Powersave API functions connect an accurate 32kHz |

|    reference clock to the sleep clock input pin of the WLAN chip. Please read the WICED Powersave   |

|    Application Note located in the documentation directory if you plan to use powersave features.   |

+-----------------------------------------------------------------------------------------------------+

MAKEFILE MAKECMDGOALS=waf.sflash_write-NoOS-CY8CKIT_062-SDIO OTA2_SUPPORT is disabled

Compiling PSoC6_Peripheral_Libraries

Compiling App_SFlash_write

Compiling Platform_CY8CKIT_062

Compiling WICED

Compiling WWD_NoOS_Interface

Compiling Lib_GPIO_button

Compiling Platform_ak4954_driver

Compiling Lib_Wiced_RO_FS

Compiling PSoC6

Compiling common_GCC

Compiling PSoC6_Peripheral_Drivers

Compiling Lib_Ring_Buffer

Compiling Lib_crc

Finished Building Bootloader

Processing resources

Compiling PSoC6_Peripheral_CapSense

Compiling Lib_SPI_Flash_Library_CY8CKIT_062

Creating security credentials

Making build/waf.sflash_write-NoOS-CY8CKIT_062-SDIO/libraries/App_SFlash_write.a

Making build/waf.sflash_write-NoOS-CY8CKIT_062-SDIO/libraries/Platform_CY8CKIT_062.a

Making build/waf.sflash_write-NoOS-CY8CKIT_062-SDIO/libraries/WICED.a

Making build/waf.sflash_write-NoOS-CY8CKIT_062-SDIO/libraries/WWD_NoOS_Interface.a

Making build/waf.sflash_write-NoOS-CY8CKIT_062-SDIO/libraries/Lib_GPIO_button.a

Making build/waf.sflash_write-NoOS-CY8CKIT_062-SDIO/libraries/Platform_ak4954_driver.a

Making build/waf.sflash_write-NoOS-CY8CKIT_062-SDIO/libraries/Lib_Wiced_RO_FS.a

Making build/waf.sflash_write-NoOS-CY8CKIT_062-SDIO/libraries/PSoC6.a

Making build/waf.sflash_write-NoOS-CY8CKIT_062-SDIO/libraries/common_GCC.a

Making build/waf.sflash_write-NoOS-CY8CKIT_062-SDIO/libraries/PSoC6_Peripheral_Drivers.a

Making build/waf.sflash_write-NoOS-CY8CKIT_062-SDIO/libraries/Lib_Ring_Buffer.a

Making build/waf.sflash_write-NoOS-CY8CKIT_062-SDIO/libraries/Lib_crc.a

Making build/waf.sflash_write-NoOS-CY8CKIT_062-SDIO/libraries/PSoC6_Peripheral_Libraries.a

Making build/waf.sflash_write-NoOS-CY8CKIT_062-SDIO/libraries/PSoC6_Peripheral_CapSense.a

Making build/waf.sflash_write-NoOS-CY8CKIT_062-SDIO/libraries/Lib_SPI_Flash_Library_CY8CKIT_062.a

Making waf.sflash_write-NoOS-CY8CKIT_062-SDIO.elf

Making DCT image

waf.sflash_write-NoOS-CY8CKIT_062-SDIO

----------------------------------|---------|

                                  |  Static |

              Module              |   RAM   |

----------------------------------+---------|

App                               |   21130 |

Interrupt Vectors                 |     652 |

libc                              |     556 |

Other                             |   16953 |

platform                          |    2412 |

Ring_Buffer                       |     160 |

SPI_Flash_Library_CY8CKIT_062     |    7188 |

Startup Stack & Link Script fill  |    1021 |

WWD                               |     132 |

----------------------------------+---------|

TOTAL (bytes)                     |   50204 |

----------------------------------|---------|

Making waf.sflash_write-NoOS-CY8CKIT_062-SDIO.bin

Compiling App_CE222494_PSoC6_WICED_WiFi

Build complete

Compiling Platform_CY8CKIT_062

Finished Building Serial Flash Loader App

Compiling WICED

apps/demo/CE222494_PSoC6_WICED_WiFi/CE222494_PSoC6_WICED_WiFi.c: In function 'application_start':

apps/demo/CE222494_PSoC6_WICED_WiFi/CE222494_PSoC6_WICED_WiFi.c:167:37: warning: '%s' directive writing up to 63 bytes into a region of size 39 [-Wformat-overflow=]

         sprintf(buffer, "Password:  %s\n", configAp->security_key);

                                     ^~

apps/demo/CE222494_PSoC6_WICED_WiFi/CE222494_PSoC6_WICED_WiFi.c:167:9: note: 'sprintf' output between 13 and 76 bytes into a destination of size 50

         sprintf(buffer, "Password:  %s\n", configAp->security_key);

         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Compiling Lib_HTTP_Server

Compiling Lib_device_configuration

Compiling Lib_SNTP

Compiling Lib_ugui

Compiling Lib_GPIO_button

Compiling Platform_ak4954_driver

Compiling WWD_ThreadX_Interface

Compiling WICED_ThreadX_Interface

Compiling WWD_for_SDIO_ThreadX

Compiling Supplicant_BESL

Compiling Lib_DNS

Compiling NetX_Duo

Compiling Lib_Wiced_RO_FS

Compiling PSoC6

Compiling Lib_Linked_List

Compiling Lib_Simple_HTTP_Server

Compiling Lib_DNS_Redirect_Daemon

Compiling Lib_TLV

Compiling Lib_base64

Compiling Lib_mbedTLS

Compiling Lib_micro_ecc

Compiling WWD_NetX_Duo_Interface

Compiling WICED_NetX_Duo_Interface

Compiling common_GCC

Compiling PSoC6_Peripheral_Drivers

Compiling Lib_Ring_Buffer

Compiling Lib_crc

Compiling Lib_DHCP_Server

Compiling PSoC6_Peripheral_Libraries

Compiling PSoC6_Peripheral_CapSense

Compiling Lib_SPI_Flash_Library_CY8CKIT_062

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/App_CE222494_PSoC6_WICED_WiFi.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Platform_CY8CKIT_062.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/WICED.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_HTTP_Server.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_device_configuration.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_SNTP.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_ugui.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_GPIO_button.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Platform_ak4954_driver.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/WWD_ThreadX_Interface.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/WICED_ThreadX_Interface.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/WWD_for_SDIO_ThreadX.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Supplicant_BESL.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_DNS.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/NetX_Duo.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_Wiced_RO_FS.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/PSoC6.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_Linked_List.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_Simple_HTTP_Server.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_DNS_Redirect_Daemon.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_TLV.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_base64.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_mbedTLS.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_micro_ecc.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/WWD_NetX_Duo_Interface.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/WICED_NetX_Duo_Interface.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/common_GCC.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/PSoC6_Peripheral_Drivers.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_Ring_Buffer.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_crc.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_DHCP_Server.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/PSoC6_Peripheral_Libraries.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/PSoC6_Peripheral_CapSense.a

Making build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/libraries/Lib_SPI_Flash_Library_CY8CKIT_062.a

Making demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062.elf

Making demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062.bin

demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062

----------------------------------|---------|---------|

                                  |         |  Static |

              Module              |  Flash  |   RAM   |

----------------------------------+---------+---------|

App                               |    4922 |    1176 |

crc                               |    1060 |       0 |

device_configuration              |    3609 |      20 |

DHCP_Server                       |    1460 |     132 |

DNS                               |    2048 |      44 |

DNS_Redirect_Daemon               |     718 |       0 |

HTTP_Server                       |    3946 |       8 |

Interrupt Vectors                 |     652 |       0 |

libc                              |   32892 |    3368 |

Linked_List                       |     466 |       0 |

mbedTLS                           |  111926 |      88 |

Networking                        |    6030 |   13912 |

NetX-Duo - Interfaces & Stacks    |       0 |      16 |

NVRam                             |     640 |       0 |

Other                             |   93179 |    7625 |

Packet Buffers                    |       0 |   22470 |

platform                          |    3908 |     736 |

RAM Initialisation                |    4372 |       0 |

resources                         |   59611 |       0 |

Ring_Buffer                       |     160 |       0 |

Simple_HTTP_Server                |    1034 |       0 |

SNTP                              |     712 |      96 |

SPI_Flash_Library_CY8CKIT_062     |    1088 |     352 |

Startup Stack & Link Script fill  |     147 |      29 |

Supplicant - BESL                 |    7581 |     864 |

ThreadX                           |    8744 |     400 |

TLV                               |     214 |       0 |

ugui                              |    8052 |       4 |

WICED                             |    6006 |    1076 |

Wiced_RO_FS                       |     568 |       0 |

WWD                               |   18645 |    3208 |

----------------------------------+---------+---------|

TOTAL (bytes)                     |  380018 |   55624 |

----------------------------------|---------|---------|

Building apps lookup table

Downloading Bootloader ...

Download complete

Downloading DCT ...

Download complete

Downloading resources filesystem ... build/demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062/filesystem.bin at sector 1  size 111...

tools/makefiles/wiced_apps.mk:334: recipe for target 'FILESYSTEM_IMAGE_DOWNLOAD' failed

make.exe[1]: *** [FILESYSTEM_IMAGE_DOWNLOAD] Error 1

Makefile:351: recipe for target 'main_app' failed

make: *** [main_app] Error 2

23:04:41 Build Finished (took 3m:35s.986ms)

0 Likes
garc_3476631
New Contributor II

Hello riya

Can someone from your team review the results posted and provide a solution.

Thanks

0 Likes
garc_3476631
New Contributor II

Hello,

Has anyone in the Community experienced this issue and can provide a solution.

It is odd that I highlight the Kit is not recognized on the USB port, so why I am being advised to uninstall, reinstall the WICED (WICKED) Development Environment ?

I theorize that advise will waste my time and others.

Any opinions ?

Thanks

0 Likes
PriyaM_16
Moderator
Moderator

Hello,

Please let us know if you still have issues in programming the board?

0 Likes