cancel
Showing results for 
Search instead for 
Did you mean: 

WICED Studio Wi-Fi Combo

Anonymous
Not applicable

I have my "Dcuments" folder on my windows 10 machine redirected to point to a documents folder on my Google stream drive(g:)

The Wiced installer didn't seem to honour my documents folder redurect, and instead installed the sdk by default in:

Windows/user/<me>/documents...

Which is a redundant folder in my system.

I uninstalled, and reinstalled specifying my Google drive documents folder for the SDK. This appeared to work in the sense that the SDK appeared to be installed in the correct place, but the target builds (e.g. Hello sensor) don't seem to work with this configuration. I uninstalled again and reinstalled with default configuration and builds all work again. It appears to me that some of the build paths might not be correctly set up to honour a non-default SDK installation. Can you shed any light on this problem? I would prefer to keep my development files on my Google Drive rather than my local hard drive, if possible. Any advice appreciated.

0 Likes
Reply
7 Replies
Anonymous
Not applicable

In the non-default SDK configuration case, can you add a VERBOSE=1 in the make target and share the download logs. It might help us determine where in the makefile is the issue.

0 Likes
Reply
Anonymous
Not applicable

I added the verbose=1 to the hello_sensor target. I couldn't find the download logs - but captured the console output here. Hoping that is similar to the logs... There are some "no such file or directory" errors near the botytom.

----------

23:20:40 **** Build of configuration Release for project 20719-B1_Bluetooth ****

"G:\\My Drive\\Documents\\WICED-Studio-6.2\\20719-B1_Bluetooth\\make.exe" demo.hello_sensor-CYW920719Q40EVB_01 download VERBOSE=1

ADK parameters:

GCC_TOOL_DIR="..\..\43xxx_Wi-Fi\tools\ARM_GNU\Win32\bin\"

TC="wiced"

DIR="../../common/apps/demo/hello_sensor"

BLD="A_20719B1"

TOOLSBIN="..\..\wiced_tools\common\Win32\"

BASE_IN="rom"

SPAR_IN="ram"

BIN_OUT_DIR="../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release"

OUTPUT_NAME="hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release"

CGS_LIST=""

CONFIG_DEFINITION=""

PLATFORM_CGS_PATH="../../platforms/../platforms/CYW207x9B1.cgs"

APP_FULL="demo/hello_sensor"

PATCH_ROOT_DIR=""

PLATFORM_NV="OCF"

DEBUG=""

DIRECT_LOAD=""

COMPRESSION_ENABLED=""

COMPRESSOR=""

"../wiced_tools/common/Win32/make.exe" -C WICED   -j4  cgs

..\..\wiced_tools\common\Win32\perl -e "$s=A_20719B1;$s=~m/^([AF])_(\d{5})([A-Z])(\d)/;print $2;"

..\..\wiced_tools\common\Win32\perl -e "$s=A_20719B1;$s=~m/^([AF])_(\d{5})([A-Z])(\d)/;print $3.$4;"

..\..\wiced_tools\common\Win32\perl -e "$s=A_20719B1;$s=~m/^([AF])_(\d{5})([A-Z])(\d)/;print $1;"

Compiling wiced_platform_pin_config.c

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

make.exe[1]: Entering directory 'G:/My Drive/Documents/WICED-Studio-6.2/20719-B1_Bluetooth/WICED'

..\..\wiced_tools\common\Win32\mkdir -p ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/CYW920719Q40EVB_01

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

Compiling wiced_platform.c

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

..\..\43xxx_Wi-Fi\tools\ARM_GNU\Win32\bin\arm-none-eabi-gcc  -DCYW20719B1=1 -DCHIP=20719 -DWICED_SDK_MAJOR_VER=6 -DWICED_SDK_MINOR_VER=2 -DWICED_SDK_REV_NUMBER=000 -DWICED_SDK_BUILD_NUMBER=72 -DPOWER_CLASS=1 -DWICED_BT_TRACE_ENABLE -funsigned-char -fshort-wchar @internal/20719B1//gcc/20719B1.cflag -DTOOLCHAIN_wiced=1 -c -DCOMPILER_ARM -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mthumb -mlittle-endian -Os -g -Wa,-adhln -ffunction-sections -ffreestanding -DSPAR_CRT_SETUP=hello_sensor_spar_crt_setup -DSPAR_APP_SETUP=application_setup -D__TARGET_CPU_CORTEX_M4 -D__ARMCC_VERSION=400677 -I../../common/apps/demo/hello_sensor -I. -Icommon -I../platforms/CYW920719Q40EVB_01 -Iinternal/20719B1//patches/.. -I../include/ -I../../common/include/ -I../include/platforms/CYW920719Q40EVB_01/ -I../include/Drivers/ -I../include/Drivers/20719 -I../include/20719 -I../include/20719/stack -I../include/20719/internal -I../include/20719/hal -I../include/20719/arm -I../include/20719/arm/cmsis -Iinternal/20719B1  -o ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/CYW920719Q40EVB_01/wiced_platform_pin_config.d ../platforms/CYW920719Q40EVB_01/wiced_platform_pin_config.c > ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/CYW920719Q40EVB_01/wiced_platform_pin_config.list

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

arm-none-eabi-gcc: error: CreateProcess: No such file or directory

..\..\wiced_tools\common\Win32\mkdir -p ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/platforms

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

..\..\43xxx_Wi-Fi\tools\ARM_GNU\Win32\bin\arm-none-eabi-gcc  -DCYW20719B1=1 -DCHIP=20719 -DWICED_SDK_MAJOR_VER=6 -DWICED_SDK_MINOR_VER=2 -DWICED_SDK_REV_NUMBER=000 -DWICED_SDK_BUILD_NUMBER=72 -DPOWER_CLASS=1 -DWICED_BT_TRACE_ENABLE -funsigned-char -fshort-wchar @internal/20719B1//gcc/20719B1.cflag -DTOOLCHAIN_wiced=1 -c -DCOMPILER_ARM -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mthumb -mlittle-endian -Os -g -Wa,-adhln -ffunction-sections -ffreestanding -DSPAR_CRT_SETUP=hello_sensor_spar_crt_setup -DSPAR_APP_SETUP=application_setup -D__TARGET_CPU_CORTEX_M4 -D__ARMCC_VERSION=400677 -I../../common/apps/demo/hello_sensor -I. -Icommon -I../platforms/CYW920719Q40EVB_01 -Iinternal/20719B1//patches/.. -I../include/ -I../../common/include/ -I../include/platforms/CYW920719Q40EVB_01/ -I../include/Drivers/ -I../include/Drivers/20719 -I../include/20719 -I../include/20719/stack -I../include/20719/internal -I../include/20719/hal -I../include/20719/arm -I../include/20719/arm/cmsis -Iinternal/20719B1  -o ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/platforms/wiced_platform.d ../platforms/wiced_platform.c > ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/platforms/wiced_platform.list

arm-none-eabi-gcc: error: CreateProcess: No such file or directory

Compiling spar_setup.c

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

..\..\wiced_tools\common\Win32\mkdir -p ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

Compiling hello_sensor.c

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

..\..\43xxx_Wi-Fi\tools\ARM_GNU\Win32\bin\arm-none-eabi-gcc  -DCYW20719B1=1 -DCHIP=20719 -DWICED_SDK_MAJOR_VER=6 -DWICED_SDK_MINOR_VER=2 -DWICED_SDK_REV_NUMBER=000 -DWICED_SDK_BUILD_NUMBER=72 -DPOWER_CLASS=1 -DWICED_BT_TRACE_ENABLE -funsigned-char -fshort-wchar @internal/20719B1//gcc/20719B1.cflag -DTOOLCHAIN_wiced=1 -c -DCOMPILER_ARM -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mthumb -mlittle-endian -Os -g -Wa,-adhln -ffunction-sections -ffreestanding -DSPAR_CRT_SETUP=hello_sensor_spar_crt_setup -DSPAR_APP_SETUP=application_setup -D__TARGET_CPU_CORTEX_M4 -D__ARMCC_VERSION=400677 -I../../common/apps/demo/hello_sensor -I. -Icommon -I../platforms/CYW920719Q40EVB_01 -Iinternal/20719B1//patches/.. -I../include/ -I../../common/include/ -I../include/platforms/CYW920719Q40EVB_01/ -I../include/Drivers/ -I../include/Drivers/20719 -I../include/20719 -I../include/20719/stack -I../include/20719/internal -I../include/20719/hal -I../include/20719/arm -I../include/20719/arm/cmsis -Iinternal/20719B1  -o ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/spar_setup.t common/spar_setup.c > ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/spar_setup.list

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

arm-none-eabi-gcc: error: CreateProcess: No such file or directory

make.exe[1]: *** [../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/spar_setup.o] Error 1

makefile:401: recipe for target '../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/spar_setup.o' failed

make: *** [demo.hello_sensor-CYW920719Q40EVB_01] Error 2

make.exe[1]: Leaving directory 'G:/My Drive/Documents/WICED-Studio-6.2/20719-B1_Bluetooth/WICED'

Makefile:379: recipe for target 'demo.hello_sensor-CYW920719Q40EVB_01' failed

23:20:57 Build Finished (took 17s.154ms)

0 Likes
Reply
Moderator
Moderator

The install logs are in the %tmp%\wiced_install_log folder on the PC.

0 Likes
Reply
Honored Contributor

Your sdk version is 006.002.000.0072 which has below known issues.

1. [20719B1]: snip.bt apps are not linked under Project Explorer in SDK.

2. Fix for compiler warning for code generated by WICED BT Des

Maybe you need to try sdk-6.2.1:

https://community.cypress.com/thread/34443

Anonymous
Not applicable

I thought you wanted build logs rather than install logs.... I will try the

6.2.1 release as suggested and report back with console output and install

logs, if I still have a problem.

On Mon., 25 Jun. 2018, 11:50 pm axel.lin_1746341, <

0 Likes
Reply
Anonymous
Not applicable

I've installed Wiced 6.2.1 - but still have the problem. Below is the verbose hello_sensor build console output - and I'll attach the install logs. I can't see any obvious errors in the install log, but there are some errors n the console output. e.g.

"

CYW920719Q40EVB_01-rom-ram-Wiced-release/spar_setup.list

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

arm-none-eabi-gcc: error: CreateProcess: No such file or directory

_________________

13:09:04 **** Build of configuration Release for project 20719-B1_Bluetooth ****

"G:\\My Drive\\Documents\\WICED-Studio-6.2\\20719-B1_Bluetooth\\make.exe" demo.hello_sensor-CYW920719Q40EVB_01 download VERBOSE=1

ADK parameters:

GCC_TOOL_DIR="..\..\43xxx_Wi-Fi\tools\ARM_GNU\Win32\bin\"

TC="wiced"

DIR="../../common/apps/demo/hello_sensor"

BLD="A_20719B1"

TOOLSBIN="..\..\wiced_tools\common\Win32\"

BASE_IN="rom"

SPAR_IN="ram"

BIN_OUT_DIR="../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release"

OUTPUT_NAME="hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release"

CGS_LIST=""

CONFIG_DEFINITION=""

PLATFORM_CGS_PATH="../../platforms/../platforms/CYW207x9B1.cgs"

APP_FULL="demo/hello_sensor"

PATCH_ROOT_DIR=""

PLATFORM_NV="OCF"

DEBUG=""

DIRECT_LOAD=""

COMPRESSION_ENABLED=""

COMPRESSOR=""

"../wiced_tools/common/Win32/make.exe" -C WICED  -j4  cgs

..\..\wiced_tools\common\Win32\perl -e "$s=A_20719B1;$s=~m/^([AF])_(\d{5})([A-Z])(\d)/;print $2;"

..\..\wiced_tools\common\Win32\perl -e "$s=A_20719B1;$s=~m/^([AF])_(\d{5})([A-Z])(\d)/;print $3.$4;"

..\..\wiced_tools\common\Win32\perl -e "$s=A_20719B1;$s=~m/^([AF])_(\d{5})([A-Z])(\d)/;print $1;"

Compiling wiced_platform_pin_config.c

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

make.exe[1]: Entering directory 'G:/My Drive/Documents/WICED-Studio-6.2/20719-B1_Bluetooth/WICED'

..\..\wiced_tools\common\Win32\mkdir -p ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/CYW920719Q40EVB_01

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

Compiling wiced_platform.c

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

..\..\43xxx_Wi-Fi\tools\ARM_GNU\Win32\bin\arm-none-eabi-gcc  -DCYW20719B1=1 -DCHIP=20719 -DWICED_SDK_MAJOR_VER=6 -DWICED_SDK_MINOR_VER=2 -DWICED_SDK_REV_NUMBER=1 -DWICED_SDK_BUILD_NUMBER=2 -DPOWER_CLASS=1 -DWICED_BT_TRACE_ENABLE -funsigned-char -fshort-wchar @internal/20719B1//gcc/20719B1.cflag -DTOOLCHAIN_wiced=1 -c -DCOMPILER_ARM -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mthumb -mlittle-endian -Os -g -Wa,-adhln -ffunction-sections -ffreestanding -DSPAR_CRT_SETUP=hello_sensor_spar_crt_setup -DSPAR_APP_SETUP=application_setup -D__TARGET_CPU_CORTEX_M4 -D__ARMCC_VERSION=400677 -I../../common/apps/demo/hello_sensor -I. -Icommon -I../platforms/CYW920719Q40EVB_01 -Iinternal/20719B1//patches/.. -I../include/ -I../../common/include/ -I../include/platforms/CYW920719Q40EVB_01/ -I../include/Drivers/ -I../include/Drivers/20719 -I../include/20719 -I../include/20719/hal -I../include/20719/internal -I../include/20719/stack -I../include/20719/arm -I../include/20719/arm/cmsis -Iinternal/20719B1  -o ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/CYW920719Q40EVB_01/wiced_platform_pin_config.d ../platforms/CYW920719Q40EVB_01/wiced_platform_pin_config.c > ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/CYW920719Q40EVB_01/wiced_platform_pin_config.list

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

arm-none-eabi-gcc: error: CreateProcess: No such file or directory

..\..\wiced_tools\common\Win32\mkdir -p ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/platforms

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

..\..\43xxx_Wi-Fi\tools\ARM_GNU\Win32\bin\arm-none-eabi-gcc  -DCYW20719B1=1 -DCHIP=20719 -DWICED_SDK_MAJOR_VER=6 -DWICED_SDK_MINOR_VER=2 -DWICED_SDK_REV_NUMBER=1 -DWICED_SDK_BUILD_NUMBER=2 -DPOWER_CLASS=1 -DWICED_BT_TRACE_ENABLE -funsigned-char -fshort-wchar @internal/20719B1//gcc/20719B1.cflag -DTOOLCHAIN_wiced=1 -c -DCOMPILER_ARM -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mthumb -mlittle-endian -Os -g -Wa,-adhln -ffunction-sections -ffreestanding -DSPAR_CRT_SETUP=hello_sensor_spar_crt_setup -DSPAR_APP_SETUP=application_setup -D__TARGET_CPU_CORTEX_M4 -D__ARMCC_VERSION=400677 -I../../common/apps/demo/hello_sensor -I. -Icommon -I../platforms/CYW920719Q40EVB_01 -Iinternal/20719B1//patches/.. -I../include/ -I../../common/include/ -I../include/platforms/CYW920719Q40EVB_01/ -I../include/Drivers/ -I../include/Drivers/20719 -I../include/20719 -I../include/20719/hal -I../include/20719/internal -I../include/20719/stack -I../include/20719/arm -I../include/20719/arm/cmsis -Iinternal/20719B1  -o ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/platforms/wiced_platform.d ../platforms/wiced_platform.c > ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/platforms/wiced_platform.list

arm-none-eabi-gcc: error: CreateProcess: No such file or directory

Compiling spar_setup.c

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

..\..\wiced_tools\common\Win32\mkdir -p ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

Compiling hello_sensor.c

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

..\..\43xxx_Wi-Fi\tools\ARM_GNU\Win32\bin\arm-none-eabi-gcc  -DCYW20719B1=1 -DCHIP=20719 -DWICED_SDK_MAJOR_VER=6 -DWICED_SDK_MINOR_VER=2 -DWICED_SDK_REV_NUMBER=1 -DWICED_SDK_BUILD_NUMBER=2 -DPOWER_CLASS=1 -DWICED_BT_TRACE_ENABLE -funsigned-char -fshort-wchar @internal/20719B1//gcc/20719B1.cflag -DTOOLCHAIN_wiced=1 -c -DCOMPILER_ARM -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mthumb -mlittle-endian -Os -g -Wa,-adhln -ffunction-sections -ffreestanding -DSPAR_CRT_SETUP=hello_sensor_spar_crt_setup -DSPAR_APP_SETUP=application_setup -D__TARGET_CPU_CORTEX_M4 -D__ARMCC_VERSION=400677 -I../../common/apps/demo/hello_sensor -I. -Icommon -I../platforms/CYW920719Q40EVB_01 -Iinternal/20719B1//patches/.. -I../include/ -I../../common/include/ -I../include/platforms/CYW920719Q40EVB_01/ -I../include/Drivers/ -I../include/Drivers/20719 -I../include/20719 -I../include/20719/hal -I../include/20719/internal -I../include/20719/stack -I../include/20719/arm -I../include/20719/arm/cmsis -Iinternal/20719B1  -o ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/spar_setup.t common/spar_setup.c > ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/spar_setup.list

..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719

arm-none-eabi-gcc: error: CreateProcess: No such file or directory

makefile:401: recipe for target '../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/spar_setup.o' failed

make.exe[1]: *** [../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/spar_setup.o] Error 1

make.exe[1]: Leaving directory 'G:/My Drive/Documents/WICED-Studio-6.2/20719-B1_Bluetooth/WICED'

make: *** [demo.hello_sensor-CYW920719Q40EVB_01] Error 2

Makefile:379: recipe for target 'demo.hello_sensor-CYW920719Q40EVB_01' failed

13:09:23 Build Finished (took 18s.802ms)

0 Likes
Reply
Moderator
Moderator

Adding yssu and a few other members of the Applications team so they can review:  grsr riya rroy zhez zhxh yans kavs shjl

0 Likes
Reply