- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have my "Dcuments" folder on my windows 10 machine redirected to point to a documents folder on my Google stream drive(g:)
The Wiced installer didn't seem to honour my documents folder redurect, and instead installed the sdk by default in:
Windows/user/<me>/documents...
Which is a redundant folder in my system.
I uninstalled, and reinstalled specifying my Google drive documents folder for the SDK. This appeared to work in the sense that the SDK appeared to be installed in the correct place, but the target builds (e.g. Hello sensor) don't seem to work with this configuration. I uninstalled again and reinstalled with default configuration and builds all work again. It appears to me that some of the build paths might not be correctly set up to honour a non-default SDK installation. Can you shed any light on this problem? I would prefer to keep my development files on my Google Drive rather than my local hard drive, if possible. Any advice appreciated.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
In the non-default SDK configuration case, can you add a VERBOSE=1 in the make target and share the download logs. It might help us determine where in the makefile is the issue.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I added the verbose=1 to the hello_sensor target. I couldn't find the download logs - but captured the console output here. Hoping that is similar to the logs... There are some "no such file or directory" errors near the botytom.
----------
23:20:40 **** Build of configuration Release for project 20719-B1_Bluetooth ****
"G:\\My Drive\\Documents\\WICED-Studio-6.2\\20719-B1_Bluetooth\\make.exe" demo.hello_sensor-CYW920719Q40EVB_01 download VERBOSE=1
ADK parameters:
GCC_TOOL_DIR="..\..\43xxx_Wi-Fi\tools\ARM_GNU\Win32\bin\"
TC="wiced"
DIR="../../common/apps/demo/hello_sensor"
BLD="A_20719B1"
TOOLSBIN="..\..\wiced_tools\common\Win32\"
BASE_IN="rom"
SPAR_IN="ram"
BIN_OUT_DIR="../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release"
OUTPUT_NAME="hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release"
CGS_LIST=""
CONFIG_DEFINITION=""
PLATFORM_CGS_PATH="../../platforms/../platforms/CYW207x9B1.cgs"
APP_FULL="demo/hello_sensor"
PATCH_ROOT_DIR=""
PLATFORM_NV="OCF"
DEBUG=""
DIRECT_LOAD=""
COMPRESSION_ENABLED=""
COMPRESSOR=""
"../wiced_tools/common/Win32/make.exe" -C WICED -j4 cgs
..\..\wiced_tools\common\Win32\perl -e "$s=A_20719B1;$s=~m/^([AF])_(\d{5})([A-Z])(\d)/;print $2;"
..\..\wiced_tools\common\Win32\perl -e "$s=A_20719B1;$s=~m/^([AF])_(\d{5})([A-Z])(\d)/;print $3.$4;"
..\..\wiced_tools\common\Win32\perl -e "$s=A_20719B1;$s=~m/^([AF])_(\d{5})([A-Z])(\d)/;print $1;"
Compiling wiced_platform_pin_config.c
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
make.exe[1]: Entering directory 'G:/My Drive/Documents/WICED-Studio-6.2/20719-B1_Bluetooth/WICED'
..\..\wiced_tools\common\Win32\mkdir -p ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/CYW920719Q40EVB_01
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
Compiling wiced_platform.c
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
..\..\43xxx_Wi-Fi\tools\ARM_GNU\Win32\bin\arm-none-eabi-gcc -DCYW20719B1=1 -DCHIP=20719 -DWICED_SDK_MAJOR_VER=6 -DWICED_SDK_MINOR_VER=2 -DWICED_SDK_REV_NUMBER=000 -DWICED_SDK_BUILD_NUMBER=72 -DPOWER_CLASS=1 -DWICED_BT_TRACE_ENABLE -funsigned-char -fshort-wchar @internal/20719B1//gcc/20719B1.cflag -DTOOLCHAIN_wiced=1 -c -DCOMPILER_ARM -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mthumb -mlittle-endian -Os -g -Wa,-adhln -ffunction-sections -ffreestanding -DSPAR_CRT_SETUP=hello_sensor_spar_crt_setup -DSPAR_APP_SETUP=application_setup -D__TARGET_CPU_CORTEX_M4 -D__ARMCC_VERSION=400677 -I../../common/apps/demo/hello_sensor -I. -Icommon -I../platforms/CYW920719Q40EVB_01 -Iinternal/20719B1//patches/.. -I../include/ -I../../common/include/ -I../include/platforms/CYW920719Q40EVB_01/ -I../include/Drivers/ -I../include/Drivers/20719 -I../include/20719 -I../include/20719/stack -I../include/20719/internal -I../include/20719/hal -I../include/20719/arm -I../include/20719/arm/cmsis -Iinternal/20719B1 -o ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/CYW920719Q40EVB_01/wiced_platform_pin_config.d ../platforms/CYW920719Q40EVB_01/wiced_platform_pin_config.c > ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/CYW920719Q40EVB_01/wiced_platform_pin_config.list
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
arm-none-eabi-gcc: error: CreateProcess: No such file or directory
..\..\wiced_tools\common\Win32\mkdir -p ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/platforms
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
..\..\43xxx_Wi-Fi\tools\ARM_GNU\Win32\bin\arm-none-eabi-gcc -DCYW20719B1=1 -DCHIP=20719 -DWICED_SDK_MAJOR_VER=6 -DWICED_SDK_MINOR_VER=2 -DWICED_SDK_REV_NUMBER=000 -DWICED_SDK_BUILD_NUMBER=72 -DPOWER_CLASS=1 -DWICED_BT_TRACE_ENABLE -funsigned-char -fshort-wchar @internal/20719B1//gcc/20719B1.cflag -DTOOLCHAIN_wiced=1 -c -DCOMPILER_ARM -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mthumb -mlittle-endian -Os -g -Wa,-adhln -ffunction-sections -ffreestanding -DSPAR_CRT_SETUP=hello_sensor_spar_crt_setup -DSPAR_APP_SETUP=application_setup -D__TARGET_CPU_CORTEX_M4 -D__ARMCC_VERSION=400677 -I../../common/apps/demo/hello_sensor -I. -Icommon -I../platforms/CYW920719Q40EVB_01 -Iinternal/20719B1//patches/.. -I../include/ -I../../common/include/ -I../include/platforms/CYW920719Q40EVB_01/ -I../include/Drivers/ -I../include/Drivers/20719 -I../include/20719 -I../include/20719/stack -I../include/20719/internal -I../include/20719/hal -I../include/20719/arm -I../include/20719/arm/cmsis -Iinternal/20719B1 -o ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/platforms/wiced_platform.d ../platforms/wiced_platform.c > ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/platforms/wiced_platform.list
arm-none-eabi-gcc: error: CreateProcess: No such file or directory
Compiling spar_setup.c
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
..\..\wiced_tools\common\Win32\mkdir -p ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
Compiling hello_sensor.c
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
..\..\43xxx_Wi-Fi\tools\ARM_GNU\Win32\bin\arm-none-eabi-gcc -DCYW20719B1=1 -DCHIP=20719 -DWICED_SDK_MAJOR_VER=6 -DWICED_SDK_MINOR_VER=2 -DWICED_SDK_REV_NUMBER=000 -DWICED_SDK_BUILD_NUMBER=72 -DPOWER_CLASS=1 -DWICED_BT_TRACE_ENABLE -funsigned-char -fshort-wchar @internal/20719B1//gcc/20719B1.cflag -DTOOLCHAIN_wiced=1 -c -DCOMPILER_ARM -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mthumb -mlittle-endian -Os -g -Wa,-adhln -ffunction-sections -ffreestanding -DSPAR_CRT_SETUP=hello_sensor_spar_crt_setup -DSPAR_APP_SETUP=application_setup -D__TARGET_CPU_CORTEX_M4 -D__ARMCC_VERSION=400677 -I../../common/apps/demo/hello_sensor -I. -Icommon -I../platforms/CYW920719Q40EVB_01 -Iinternal/20719B1//patches/.. -I../include/ -I../../common/include/ -I../include/platforms/CYW920719Q40EVB_01/ -I../include/Drivers/ -I../include/Drivers/20719 -I../include/20719 -I../include/20719/stack -I../include/20719/internal -I../include/20719/hal -I../include/20719/arm -I../include/20719/arm/cmsis -Iinternal/20719B1 -o ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/spar_setup.t common/spar_setup.c > ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/spar_setup.list
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
arm-none-eabi-gcc: error: CreateProcess: No such file or directory
make.exe[1]: *** [../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/spar_setup.o] Error 1
makefile:401: recipe for target '../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/spar_setup.o' failed
make: *** [demo.hello_sensor-CYW920719Q40EVB_01] Error 2
make.exe[1]: Leaving directory 'G:/My Drive/Documents/WICED-Studio-6.2/20719-B1_Bluetooth/WICED'
Makefile:379: recipe for target 'demo.hello_sensor-CYW920719Q40EVB_01' failed
23:20:57 Build Finished (took 17s.154ms)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The install logs are in the %tmp%\wiced_install_log folder on the PC.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Your sdk version is 006.002.000.0072 which has below known issues.
1. [20719B1]: snip.bt apps are not linked under Project Explorer in SDK.
2. Fix for compiler warning for code generated by WICED BT Des
Maybe you need to try sdk-6.2.1:
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I thought you wanted build logs rather than install logs.... I will try the
6.2.1 release as suggested and report back with console output and install
logs, if I still have a problem.
On Mon., 25 Jun. 2018, 11:50 pm axel.lin_1746341, <
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I've installed Wiced 6.2.1 - but still have the problem. Below is the verbose hello_sensor build console output - and I'll attach the install logs. I can't see any obvious errors in the install log, but there are some errors n the console output. e.g.
"
CYW920719Q40EVB_01-rom-ram-Wiced-release/spar_setup.list
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
arm-none-eabi-gcc: error: CreateProcess: No such file or directory
_________________
13:09:04 **** Build of configuration Release for project 20719-B1_Bluetooth ****
"G:\\My Drive\\Documents\\WICED-Studio-6.2\\20719-B1_Bluetooth\\make.exe" demo.hello_sensor-CYW920719Q40EVB_01 download VERBOSE=1
ADK parameters:
GCC_TOOL_DIR="..\..\43xxx_Wi-Fi\tools\ARM_GNU\Win32\bin\"
TC="wiced"
DIR="../../common/apps/demo/hello_sensor"
BLD="A_20719B1"
TOOLSBIN="..\..\wiced_tools\common\Win32\"
BASE_IN="rom"
SPAR_IN="ram"
BIN_OUT_DIR="../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release"
OUTPUT_NAME="hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release"
CGS_LIST=""
CONFIG_DEFINITION=""
PLATFORM_CGS_PATH="../../platforms/../platforms/CYW207x9B1.cgs"
APP_FULL="demo/hello_sensor"
PATCH_ROOT_DIR=""
PLATFORM_NV="OCF"
DEBUG=""
DIRECT_LOAD=""
COMPRESSION_ENABLED=""
COMPRESSOR=""
"../wiced_tools/common/Win32/make.exe" -C WICED -j4 cgs
..\..\wiced_tools\common\Win32\perl -e "$s=A_20719B1;$s=~m/^([AF])_(\d{5})([A-Z])(\d)/;print $2;"
..\..\wiced_tools\common\Win32\perl -e "$s=A_20719B1;$s=~m/^([AF])_(\d{5})([A-Z])(\d)/;print $3.$4;"
..\..\wiced_tools\common\Win32\perl -e "$s=A_20719B1;$s=~m/^([AF])_(\d{5})([A-Z])(\d)/;print $1;"
Compiling wiced_platform_pin_config.c
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
make.exe[1]: Entering directory 'G:/My Drive/Documents/WICED-Studio-6.2/20719-B1_Bluetooth/WICED'
..\..\wiced_tools\common\Win32\mkdir -p ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/CYW920719Q40EVB_01
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
Compiling wiced_platform.c
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
..\..\43xxx_Wi-Fi\tools\ARM_GNU\Win32\bin\arm-none-eabi-gcc -DCYW20719B1=1 -DCHIP=20719 -DWICED_SDK_MAJOR_VER=6 -DWICED_SDK_MINOR_VER=2 -DWICED_SDK_REV_NUMBER=1 -DWICED_SDK_BUILD_NUMBER=2 -DPOWER_CLASS=1 -DWICED_BT_TRACE_ENABLE -funsigned-char -fshort-wchar @internal/20719B1//gcc/20719B1.cflag -DTOOLCHAIN_wiced=1 -c -DCOMPILER_ARM -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mthumb -mlittle-endian -Os -g -Wa,-adhln -ffunction-sections -ffreestanding -DSPAR_CRT_SETUP=hello_sensor_spar_crt_setup -DSPAR_APP_SETUP=application_setup -D__TARGET_CPU_CORTEX_M4 -D__ARMCC_VERSION=400677 -I../../common/apps/demo/hello_sensor -I. -Icommon -I../platforms/CYW920719Q40EVB_01 -Iinternal/20719B1//patches/.. -I../include/ -I../../common/include/ -I../include/platforms/CYW920719Q40EVB_01/ -I../include/Drivers/ -I../include/Drivers/20719 -I../include/20719 -I../include/20719/hal -I../include/20719/internal -I../include/20719/stack -I../include/20719/arm -I../include/20719/arm/cmsis -Iinternal/20719B1 -o ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/CYW920719Q40EVB_01/wiced_platform_pin_config.d ../platforms/CYW920719Q40EVB_01/wiced_platform_pin_config.c > ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/CYW920719Q40EVB_01/wiced_platform_pin_config.list
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
arm-none-eabi-gcc: error: CreateProcess: No such file or directory
..\..\wiced_tools\common\Win32\mkdir -p ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/platforms
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
..\..\43xxx_Wi-Fi\tools\ARM_GNU\Win32\bin\arm-none-eabi-gcc -DCYW20719B1=1 -DCHIP=20719 -DWICED_SDK_MAJOR_VER=6 -DWICED_SDK_MINOR_VER=2 -DWICED_SDK_REV_NUMBER=1 -DWICED_SDK_BUILD_NUMBER=2 -DPOWER_CLASS=1 -DWICED_BT_TRACE_ENABLE -funsigned-char -fshort-wchar @internal/20719B1//gcc/20719B1.cflag -DTOOLCHAIN_wiced=1 -c -DCOMPILER_ARM -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mthumb -mlittle-endian -Os -g -Wa,-adhln -ffunction-sections -ffreestanding -DSPAR_CRT_SETUP=hello_sensor_spar_crt_setup -DSPAR_APP_SETUP=application_setup -D__TARGET_CPU_CORTEX_M4 -D__ARMCC_VERSION=400677 -I../../common/apps/demo/hello_sensor -I. -Icommon -I../platforms/CYW920719Q40EVB_01 -Iinternal/20719B1//patches/.. -I../include/ -I../../common/include/ -I../include/platforms/CYW920719Q40EVB_01/ -I../include/Drivers/ -I../include/Drivers/20719 -I../include/20719 -I../include/20719/hal -I../include/20719/internal -I../include/20719/stack -I../include/20719/arm -I../include/20719/arm/cmsis -Iinternal/20719B1 -o ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/platforms/wiced_platform.d ../platforms/wiced_platform.c > ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/platforms/wiced_platform.list
arm-none-eabi-gcc: error: CreateProcess: No such file or directory
Compiling spar_setup.c
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
..\..\wiced_tools\common\Win32\mkdir -p ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
Compiling hello_sensor.c
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
..\..\43xxx_Wi-Fi\tools\ARM_GNU\Win32\bin\arm-none-eabi-gcc -DCYW20719B1=1 -DCHIP=20719 -DWICED_SDK_MAJOR_VER=6 -DWICED_SDK_MINOR_VER=2 -DWICED_SDK_REV_NUMBER=1 -DWICED_SDK_BUILD_NUMBER=2 -DPOWER_CLASS=1 -DWICED_BT_TRACE_ENABLE -funsigned-char -fshort-wchar @internal/20719B1//gcc/20719B1.cflag -DTOOLCHAIN_wiced=1 -c -DCOMPILER_ARM -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mthumb -mlittle-endian -Os -g -Wa,-adhln -ffunction-sections -ffreestanding -DSPAR_CRT_SETUP=hello_sensor_spar_crt_setup -DSPAR_APP_SETUP=application_setup -D__TARGET_CPU_CORTEX_M4 -D__ARMCC_VERSION=400677 -I../../common/apps/demo/hello_sensor -I. -Icommon -I../platforms/CYW920719Q40EVB_01 -Iinternal/20719B1//patches/.. -I../include/ -I../../common/include/ -I../include/platforms/CYW920719Q40EVB_01/ -I../include/Drivers/ -I../include/Drivers/20719 -I../include/20719 -I../include/20719/hal -I../include/20719/internal -I../include/20719/stack -I../include/20719/arm -I../include/20719/arm/cmsis -Iinternal/20719B1 -o ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/spar_setup.t common/spar_setup.c > ../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/spar_setup.list
..\..\wiced_tools\common\Win32\perl scripts/get_sub_dirs.pl ../include/20719
arm-none-eabi-gcc: error: CreateProcess: No such file or directory
makefile:401: recipe for target '../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/spar_setup.o' failed
make.exe[1]: *** [../build/hello_sensor-CYW920719Q40EVB_01-rom-ram-Wiced-release/spar_setup.o] Error 1
make.exe[1]: Leaving directory 'G:/My Drive/Documents/WICED-Studio-6.2/20719-B1_Bluetooth/WICED'
make: *** [demo.hello_sensor-CYW920719Q40EVB_01] Error 2
Makefile:379: recipe for target 'demo.hello_sensor-CYW920719Q40EVB_01' failed
13:09:23 Build Finished (took 18s.802ms)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content