cancel
Showing results for 
Search instead for 
Did you mean: 

WICED Studio Wi-Fi Combo

New Contributor II

Dear All,

  I downloaded the package for BCM94343W_AVN from GitHub - CloudConnectKits/WICED-SDK-3.5.2_Platform_Files: BCM94343W_AVN platform files to add to WIC...  and was able to download the custom build application and run. But, when I run the snip.https_server application, see that there is failure in TLS connection.

   Any specific configuration need to be enabled or configured for this to work correctly.

   Please find the logs from the system and request to recommend for configurations.

Thanks and regards,
Gupta

>>>>>>>>>>>>>>>>>>>>>>>LOGS for BOOTING>>>>>>>>>>>>>>>>>

Starting WICED v3.5.2

Platform BCM94343W_AVN initialised

Started ThreadX v5.6

Initialising NetX_Duo v5.7_sp2

Creating Packet pools

WWD SDIO interface initialised

WLAN MAC Address : B0:38:29:3D:39:71

WLAN Firmware    : wl0: Nov 25 2015 12:57:14 version 7.45.45.1 (r602358) FWID 01-1920c040

Connect to the network

Joining : 4CE67640E08C

Successfully joined : 4CE67640E08C

Obtaining IPv4 address via DHCP

DHCP CLIENT hostname WICED IP

IPv4 network ready IP: 192.168.11.58

Setting IPv6 link-local address

IPv6 network ready IP: FE80:0000:0000:0000:B238:29FF:FE3D:3971

Read the certificate Key from DCT

Start HTTPS server

Get IPv4 address

Server ready at 192.168.11.58

Error starting TLS connection

Error starting TLS connection

Error starting TLS connection

Error starting TLS connection

Error starting TLS connection

0 Likes
Reply
2 Replies
Employee

did you get your AWS certificates and load them ?

Also make sure your AP allows port 8883.

0 Likes
Reply
New Contributor II

Is there any dependency on the AWS certificate for TLS working?

I am not sure on the port number. I need to dig into the router. What is the reason for this port usage for HTTPS?

0 Likes
Reply