- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
To verify that you have the application working:
1. Download to your 2070x based EVAL board.
2. The app will then become discoverable. If you have an iPhone, go to Settings > Bluetooth and click "wiced a2dp" when it appears.
3. Once connected, play audio from any other app on the iPhone. You should no longer hear audio from your phone. Instead, it will be routed through the BT connection.
4. Unless you have an external codec wired up to the EAL board, you will unfortunately not hear audio. however, you can verify the presence of audio by connecting a logic analyzer to the i2s bus. This bus is where the audio data presents by default (see schematic of your board to find the pins). Clicking pause on the iPhone should result in the i2s bus going silent.
It will also be helpful to run UART traces at the same time to watch the A2DP stream events occur.
Jacob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Most of the videos do not talk about Bluetooth. Can you direct me to Bluetooth related traning videos, please ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Unfortunately, nothing exists for specific BT development.
The videos referenced above are appropriate for getting development kits up and running inside of WICED and understanding the build and development environment. For specific application development, the sample applications are the best place to start.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
To verify that you have the application working:
1. Download to your 2070x based EVAL board.
2. The app will then become discoverable. If you have an iPhone, go to Settings > Bluetooth and click "wiced a2dp" when it appears.
3. Once connected, play audio from any other app on the iPhone. You should no longer hear audio from your phone. Instead, it will be routed through the BT connection.
4. Unless you have an external codec wired up to the EAL board, you will unfortunately not hear audio. however, you can verify the presence of audio by connecting a logic analyzer to the i2s bus. This bus is where the audio data presents by default (see schematic of your board to find the pins). Clicking pause on the iPhone should result in the i2s bus going silent.
It will also be helpful to run UART traces at the same time to watch the A2DP stream events occur.
Jacob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you