cancel
Showing results for 
Search instead for 
Did you mean: 

WICED Studio Bluetooth

New Contributor II

   hi   Cypress:

           We only want to run controller firmware on cybt-343026, but not the protocol stack on bluetooth chip.May I ask if this controller firmware can be provided? How to burn to the cybt-343026-eval development board?  TKS;

0 Likes
Reply
1 Solution
Moderator
Moderator

Hello David,

Thanks for contacting Cypress Technical Support.

BT stack of CYBT-343026 is already included in the ROM code.

However you can run BT stack on any other host like any micro controller/Linux/Android and can send directly HCI commands to CYBT-343026 device via HCI UART.

HCI UART pin details are given in the datasheet here: https://www.cypress.com/documentation/datasheets/cybt-343026-01-ez-bt-wiced-module . However you may need to program it initially with firmware / patches .

Programming options are detailed here: https://community.cypress.com/docs/DOC-14990

Getting started appnote for reference : https://www.cypress.com/documentation/application-notes/an223400-getting-started-ez-bt-wiced-modules

 

Thanks & Regards,

Anjana

View solution in original post

1 Reply
Moderator
Moderator

Hello David,

Thanks for contacting Cypress Technical Support.

BT stack of CYBT-343026 is already included in the ROM code.

However you can run BT stack on any other host like any micro controller/Linux/Android and can send directly HCI commands to CYBT-343026 device via HCI UART.

HCI UART pin details are given in the datasheet here: https://www.cypress.com/documentation/datasheets/cybt-343026-01-ez-bt-wiced-module . However you may need to program it initially with firmware / patches .

Programming options are detailed here: https://community.cypress.com/docs/DOC-14990

Getting started appnote for reference : https://www.cypress.com/documentation/application-notes/an223400-getting-started-ez-bt-wiced-modules

 

Thanks & Regards,

Anjana

View solution in original post