- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello.
Tool: Modus 2.2
Target: CYW920719B2Q40EVB-01
How can I configure PUART flow control(RTS/CTS)?
Following is not working properly.
...
[My code]
wiced_hal_puart_flow_on();
wiced_hal_puart_select_uart_pads( WICED_PUART_RXD, WICED_PUART_TXD, WICED_UART_2_CTS, WICED_UART_2_RTS);
...
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I heard 20719B2 have a problem with puart flow control from Uniquest in Korea.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi ilHw_4713311,
Would you please let us know the UART pins you have selected? Also, what error or problem you are while testing?
FYR: Re: CYW20706 Can I use i2c and PUART(rx,tx,rts,cts) at them same time?
Also, check the comments in wiced_hal_puart.h-
--
Remember that P# is the physical pin number on the board minus 1.
Ex: Board Pin 33 = P32.
--
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello.
I'm using CYW920719B2Q40EVB-01 board, and want to use PUART flow control with PC comport via USB.
I just need sample code to use PUART flow control with CYW920719B2Q40EVB.
In my test
wiced_hal_puart_select_uart_pads( WICED_PUART_RXD, WICED_PUART_TXD, 0, 0);
-> I could send tx and PC received rx;
wiced_hal_puart_select_uart_pads( WICED_PUART_RXD, WICED_PUART_TXD, WICED_UART_2_CTS, WICED_UART_2_RTS);
-> No data were transferred.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I heard 20719B2 have a problem with puart flow control from Uniquest in Korea.