cancel
Showing results for 
Search instead for 
Did you mean: 

WICED Studio Bluetooth

New Contributor II

Hi everyone

Could you provied the materials related to the test results specified by Sig

on the CYW20819 evaluation board (CYW920819EVB-02) for us?

Thanks,

Yang

0 Likes
Reply
1 Solution
Moderator
Moderator

Hi Yang,

The test result is not needed during the SIG certification for the customer's module. They only need component QDID for it.

View solution in original post

0 Likes
Reply
7 Replies
Moderator
Moderator

Please check the following qualified information: https://launchstudio.bluetooth.com/ListingDetails/109444

0 Likes
Reply
New Contributor II

Hi XinghaoZ_26

This is qualified information.

I would like to obtain related materials for the results of your SIG test.

(CYW920819EVB-02)

Thanks,

Yang

0 Likes
Reply
Moderator
Moderator

Could you be more specify about the "related materials" and why you need it?

0 Likes
Reply
New Contributor II

Hi XinghaoZ_26

>"related materials"

It means the result of your SIG test.

> why you need it?

Customer uses CYW20819 to design and develop modules.

They will refer to your test results during the Sig test.

(Customers with high priority)

Thanks,

Yang

0 Likes
Reply
Moderator
Moderator

Hi Yang,

The test result is not needed during the customer's certification. Also it is not avaliable for the customer.

When they apply a new certification in the SIG. They need to supply the component QDID of the CYW20819 which I already give you in the above response. Then they can re-use the test evidence from the component.

Customer only needs to test the RF-PHY for their module.

New Contributor II

Hi XinghaoZ_26

> The test result is not needed during the customer's certification. Also it is not avaliable for the customer.

Sorry, I will clarify what I want.

>It means the result of your SIG test.

I mean that the customer wants the RF test report (or test data) of CYW920819EVB-02.

Is this understanding the same as you?

Could you provide this information for us?

Thanks,

Yang

0 Likes
Reply
Moderator
Moderator

Hi Yang,

The test result is not needed during the SIG certification for the customer's module. They only need component QDID for it.

View solution in original post

0 Likes
Reply