cancel
Showing results for 
Search instead for 
Did you mean: 

WICED Studio Bluetooth

SaEa_4705941
New Contributor II

What is the maximum throughput when using this module in BTclassic and 1M baudrate? Would that be the same as HCI mode?

It would be helpful if you could share any data related to throughput testing in using Ez serial.

Thanks,

Se

0 Likes
1 Solution
Owen_Zhang123
Moderator
Moderator

Per our internal test, the speed is 65 KBps from module to laptop  and 35 KBps from laptop to module with flow control enable and no data loss.

View solution in original post

3 Replies
Owen_Zhang123
Moderator
Moderator

Per our internal test, the speed is 65 KBps from module to laptop  and 35 KBps from laptop to module with flow control enable and no data loss.

View solution in original post

SaEa_4705941
New Contributor II

Thanks XinghaoZ_26

Was it achieved with the hardware flow control or the software one?

Also, if I increase the baud rate, is that possible to achieve a throughput close to 100KBps from the module to laptop in Ezserial mode?

0 Likes
Owen_Zhang123
Moderator
Moderator

It is achieved with the hardware flow control by enable the flow control of PUART in the EZ-Serial FW.

The speed is limited by the data process and SPP transmission. Increase the UART baudrate will not help.

0 Likes