cancel
Showing results for 
Search instead for 
Did you mean: 

WICED Studio Bluetooth

GiGu_4666771
New Contributor II

I am using a CYBT-343026-EVAL board.

I prepare it donwloading the application "CYBT-343026-01 WICED EZ-Serial FW Image V1.1.14".

The application starts and I see the text command interpreter on the PUART interface.

I see no command interpreter on the HCI UART interface.

Can I enable the ""CYBT-343026-01 WICED EZ-Serial FW" application to expose the command interpreter

on HCI UART too?

If not, is there a ready to use application for this purpose?

Thanks.

0 Likes
1 Solution
AnjanaM_61
Moderator
Moderator

Hi GiGu_4666771 ,

For CYBT-343026 Ez-Serial FW, HCI UART is enabled only for reprogramming the device.

PUART is used as command interface.

You may refer to user guide available here: https://www.cypress.com/file/455966/download

Note : You can also use WICED SDK IDE to develop your own application as per requirement

Regards,

Anjana

View solution in original post

1 Reply
AnjanaM_61
Moderator
Moderator

Hi GiGu_4666771 ,

For CYBT-343026 Ez-Serial FW, HCI UART is enabled only for reprogramming the device.

PUART is used as command interface.

You may refer to user guide available here: https://www.cypress.com/file/455966/download

Note : You can also use WICED SDK IDE to develop your own application as per requirement

Regards,

Anjana

View solution in original post