- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Everyone,
According to the data sheet of CYBT-333032
Document Number: 002-25196 Rev. * A
Table 13
1. Connected (Connected with no data transfer) current consumption is 2.6mA.
2. Connected + SNIFF (Connected with no data transfer + SNIFF (500 ms)) consumes 0.95mA.
Please tell me the reason why 2 is smaller than 1.
Is it correct as the following guess?
(1 is the operation at the time of master, 2 is the operation at the time of slave?)
Thanks,
Yang
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
In Sniff mode, the duty cycle of the slave’s activity in the piconet may be reduced. The time slots when a slave is listening are reduced, so the master shall only transmit to a slave in specified time slots.
For more info, please refer https://www.bluetooth.com/bluetooth-resources/sniff-and-sniff-subrating-modes/
Thanks,
-Dheeraj
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
In Sniff mode, the duty cycle of the slave’s activity in the piconet may be reduced. The time slots when a slave is listening are reduced, so the master shall only transmit to a slave in specified time slots.
For more info, please refer https://www.bluetooth.com/bluetooth-resources/sniff-and-sniff-subrating-modes/
Thanks,
-Dheeraj