WICED Studio Bluetooth

[Leo_liu1]

Hi,

I am using CYW92070xV3_EVAL and WICED studio 6.1,my make target is "snip.mesh.mesh_onoff_server-CYW920706WCDEVAL LEGACY_BOARD=1 download"

But when i use app to add device ,can't scan my 20706.

my log as shown below:

setup nvram ids: net_key_max_num:4 app_key_max_num:8 3c-75

Mesh Start

[Rx]mesh_management_cback: 15

management_cback: LOCAL_IDENTITY_KEYS_REQUEST_EVT: result:0 keys:

mesh_management_cback: 0

***** Free mem before app_init:34684

## mesh_application_init ##

wiced_bt_[Rx]gatt_register: 0

ds1:0x00504000, len:0x0007e000

ds2:0x00582000, len:0x0007e000

platform btp: Config_DS_Location 0x00003000, Confi[Rx]g_VS_Location:0x00001000

WARNING: Upgrade will fail - active DS is not one of the expected locations

WARNING: Are ConfigDSLocation and DLConfigVSLocation in the .btp set up as in nv_loc_len[]?

mesh_application_init: wiced_bt_mesh_core_ota_fw_upgrade_init failed

[Rx]mesh_application_init: unprovisioned GATT DB status:0

***** Free mem after app_init:33156[Rx]

Thanks，

Leo

[ShengY_96]

Hi Leo

Suggest to use the CYW20735B1 and CYW20719B1 for mesh application.  And contact the local sales/FAE team for specified requirement.

Regards

Jenson

[ShengY_96 · Accepted solution]

Hi Leo

Per field debug, your phone can search the CYW20706's mesh device successfully.

And suggest to use the newer version of Wiced, like 6.2.1.

Regards

Jenson