cancel
Showing results for 
Search instead for 
Did you mean: 

WICED Smart Bluetooth

Contributor

Hi:

    I use the light dimmable project to develop the bluetooth mesh, I find the wiced_bt_mesh_light_lightness_nvram_id_start in the  mesh_setup_nvram_ids(),

   I  want to know which prameters the nv id have saved .

    so  I use the wiced_hal_read_nvram API  to  read  the value from the nv id. it seems irregular value。

    I want to know if there are some documents to introduce which parameters of the model have been saved into the nvram

thanks

0 Likes
Reply
1 Solution
Moderator
Moderator

The information for the model state are defined in the model spec: https://www.bluetooth.com/specifications/mesh-specifications/

The NVRAM information are defined in the lower level of the SDK and not open to the customer. May I know why you need these information?

View solution in original post

0 Likes
Reply
3 Replies
Moderator
Moderator

The wiced_bt_mesh_light_lightness_nvram_id_start saves the configuration and states for the model. It is used for the low layer stack which is in the lib file and is not open to the customer.

0 Likes
Reply
Contributor

Hi  OWenZ_26:

      I  want to know which configuration and states are saved and the detail locations in the nv !

0 Likes
Reply
Moderator
Moderator

The information for the model state are defined in the model spec: https://www.bluetooth.com/specifications/mesh-specifications/

The NVRAM information are defined in the lower level of the SDK and not open to the customer. May I know why you need these information?

View solution in original post

0 Likes
Reply