I'm in trouble with cgs.exe and chipload.exe.
In SDK2.1.1, I tried to download binary into serial flash in 20736 soc using cmd tool.
I already read j.t blog "Programming the 20732S MODULE USING 2073xTAG BOARD".
With the files in Loader.zip, cgs.exe and chipload.exe work well.
But when I exchange cgs and btp files, it failed.
Example is 20737 proximity.
My command is following:
1. cgs.exe
1) Serial Flash :
cgs.exe test.hex -A -0xF8000000 -B 20737_SFLASH.btp -D . A_20737A1-proximity-rom-ram-spar.cgs
2) EEPROM : after failure, I changed SFLASH with EEPROM.
cgs.exe test.hex -A -0xFF000000 -B 20737_EEPROM.btp -D . A_20737A1-proximity-rom-ram-spar.cgs
--> for both case, Processing cgs files failed.
2. ChipLoad.exe
I found .hex file in build folder, so I tried to download .hex file through cmd tool.
ChipLoad.exe -BLUETOOLMODE -PORT COM5 -BAUDRATE 115200nfc -MINIDRIVER uart_DISABLE_EEPROM_WP_PIN1.hex -CONFIG proximity-BCM920737TAG_Q32-rom-ram-Wiced-release.hex
and download failed with the message of ":Download 0 code bytes <0.0%> and 0 data bytes <0.0%>. Current state:Terminated with error.
Could you give me a guidance for this?
Thank you.
