cancel
Showing results for 
Search instead for 
Did you mean: 

WICED Smart Bluetooth

AnHu_4662101
New Contributor II

Dear representative,

While using Linux OS, is there any way to disable one of the 2x BLE devices, automatically attached, to the Linux OS?

There is a way to disable both BLE with this command, e.g.:

echo '2-1' > /sys/bus/usb/drivers/usb/unbind #OFF

Doing so does not achieve what I need because I only want to disable one of the 2x Cypress BLE devices.

Any help on this matter is appreciated.

Thanks.

0 Likes
1 Solution
AnHu_4662101
New Contributor II

Ok I've found a working solution:

echo 0 > /sys/bus/usb/devices/2-1:1.0/authorized

View solution in original post

0 Likes
3 Replies
MichaelF_56
Moderator
Moderator

Please note which device you are referring to...

CYW20719/20819, CYW20704/6/7, WiFi/BT Combo, etc.

0 Likes
AnHu_4662101
New Contributor II

ID: CYBT-413034-02

For now I can only provide the VID & PID:

ID 04b4:0005 Cypress Semiconductor Corp.

Edit: After more searching I've found this other code:

CY7C65215-32LTXI

Source: USB-Serial: Cypress Default VID and PID – KBA89355

0 Likes
AnHu_4662101
New Contributor II

Ok I've found a working solution:

echo 0 > /sys/bus/usb/devices/2-1:1.0/authorized

View solution in original post

0 Likes