cancel
Showing results for 
Search instead for 
Did you mean: 

WICED Smart Bluetooth

ANa_2105331
New Contributor II

Is there a provision where the unit at the factory can be loaded with a crude program that would come up as a  BLE device searching for a host but without full capability.  On first connection, the host quickly determines whether it has current firmware in non-volatile storage.  If it doesn’t, the host downloads it.  This minimizes what has to be hard-programmed and maximizes operating convenience.


0 Likes
1 Solution
MichaelF_56
Moderator
Moderator

You would need to write a custom application to accomplish what you've described.

However, once written, our OTA update capability would be useful to transfer the program wirelessly to the device.

Here's a link to the document that was just released which describes this capability in detail:

WICED Secure Over-the-Air Firmware Upgrade Application Note (SDK 2.1 and TAG3 Board)

View solution in original post

2 Replies
MichaelF_56
Moderator
Moderator

You would need to write a custom application to accomplish what you've described.

However, once written, our OTA update capability would be useful to transfer the program wirelessly to the device.

Here's a link to the document that was just released which describes this capability in detail:

WICED Secure Over-the-Air Firmware Upgrade Application Note (SDK 2.1 and TAG3 Board)

View solution in original post

ANa_2105331
New Contributor II

That was  helpful ! Thank you !

0 Likes