cancel
Showing results for 
Search instead for 
Did you mean: 

WICED Smart Bluetooth

WaSu_1697556
New Contributor II

Hi,

Is TEST UART the only interface that can accept HCI commands for RF testing?

One of our customers is going to use SPI for connection between BCM20736 and their host MCU.

They would like to use SPI to pipe HCI commands from the host MCU to BCM20736.

Thanks,

Wataru Sugimoto

0 Likes
1 Solution
MichaelF_56
Moderator
Moderator

Unfortunately, outside of the tools we provide and describe in the Manufacturing Bluetooth Test Tool Application Note (SDK 2.1 and TAG3 Board), we do not support direct HCI layer access on the BCM2073X or BCM2073XS families.

All access to the device occurs through the API that is available within the SDK.

View solution in original post

0 Likes
2 Replies
MichaelF_56
Moderator
Moderator

Unfortunately, outside of the tools we provide and describe in the Manufacturing Bluetooth Test Tool Application Note (SDK 2.1 and TAG3 Board), we do not support direct HCI layer access on the BCM2073X or BCM2073XS families.

All access to the device occurs through the API that is available within the SDK.

View solution in original post

0 Likes
WaSu_1697556
New Contributor II

Thanks!!

0 Likes