- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I have written some python code to use cgs.exe and ChipLoad.exe to program the 20737S on our custom board. This works well for the 20737S but after I change the Chipnames for the 20736S I get:
----------------------
Download minidriver successfully had written 251 bytes to address 0x00201000
Downloaded 0 code bytes ( 0.0%) and 0 data bytes ( 0.0%). Verified 0 code bytes ( 0.0%) and 0 data bytes ( 0.0%
). Current state: Terminated with error
Download minidriver error trying to write 251 bytes to address 0x002010FB
Child was terminated by signal 9999
----------------------
Notice that the SDK is perfectly able to program our hardware with the 20736S on it. I'll dig into log files next but so far I would like to know whether I should have changed anything else than just the name of the chip, i.e. for btp files and directories.
Regards,
Kilian
Solved! Go to Solution.
- Labels:
-
Manufacturing and Test
-
SDK 2.X
-
Windows
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The issue resolved itself. The reason my script didn't work was a bricked device. So my changes to my already working script were ok.
Sorry for the noise.
Regards,
Kilian
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Kilian,
Let me check following two item first.
- Have you changed everything for BCM20736S except ChipLoad.exe?
* Is .cgs file re-built for BCM20736?
* Is your hardware BCM20736S module?
- Can you program BCM20736S module using other environment?
(If no, what's the difference between your boards?)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Have you changed everything for BCM20736S except ChipLoad.exe?
I build it for BCM920736TAG_Q32 with the SDK/Eclipse and then I use whatever l find in the associated build directory to run cgs and Chipload so I can modify the MAC for each device.
* Is .cgs file re-built for BCM20736?
Yes
* Is your hardware BCM20736S module?
Yes
- Can you program BCM20736S module using other environment?
Yes, I can program our custom hardware with the same firmware from the SDK
(If no, what's the difference between your boards?)
I haven't used the Tag board for ages.
The question is does the download process differ between the devices in anything else than a few directory names in the SDK.
Regards,
Kilian
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The issue resolved itself. The reason my script didn't work was a bricked device. So my changes to my already working script were ok.
Sorry for the noise.
Regards,
Kilian
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks for updating the thread Killian.