- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Hoping that you are doing well.
Please find the attached floor plan, and let me know does BCM20737S placement in the board is Ok? or it should be compulsorily be at corner of board. I have keep made the keep out area as per datasheet guidelines.
Thanks for your help.
Kind Regard,
Ghalib
Solved! Go to Solution.
- Labels:
-
PCBLayout
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Ghalib,
We cannot advise on the placement due to so many design factors such as ground planes, active components, etc.
It appears that you have followed the guidelines listed here: BCM20736S Bluetooth Low Energy SiP Module Technical Reference
The placement does NOT need to be at the corner of the board.
Sincerely,
JT
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Ghalib,
We cannot advise on the placement due to so many design factors such as ground planes, active components, etc.
It appears that you have followed the guidelines listed here: BCM20736S Bluetooth Low Energy SiP Module Technical Reference
The placement does NOT need to be at the corner of the board.
Sincerely,
JT
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks a million for your reply.
Kind Regards,
Ghalib