Announcements
IMPORTANT: Cypress Developer Community is transitioning on October 20th. To learn more and be prepared for this change, check out our latest announcement.

USB Superspeed Peripherals

cancel
Showing results for 
Search instead for 
Did you mean: 
Ask a question

Recent discussions

Sort by:
yxx0803
USB Superspeed Peripherals
你好,AN65974附带的FPGA代码--StreamIN的代码中,当填满缓冲区之后经过了一个时钟周期的 “stream_in_write_wr_delay”直接跳转到了“stream_in_idle”状态,在stream_in_idle状态下会去判断flaga_d的值,此时的flaga_d的值还... Show More
SimonP
USB Superspeed Peripherals
Hi, I finally got all the information from the camera supplier and filled the 'Image Sensor Configuration' tab in the CX3 MIPI Receiver Configuration.... Show More
rossihwang
USB Superspeed Peripherals
Hardware host: tinker board 2s(rk3399),kernel 5.13 slave: sg130gs(1280*720, YUYV, 30fps) + fpga(spartan 6) + cyusb3014, isochronous mode Pro... Show More
EsPo_3827446
USB Superspeed Peripherals
I want to develop C++ application for fx3 bulk transfer IN? where I need to refer?  How much data (maximum data) can able to transfer in fx3 in sec? I... Show More
skennyg123
USB Superspeed Peripherals
I am trying to configure my device to output higher resolutions speeds at USB2.0/high speed. Specifically 720p at 30 FPS. I believe there should be en... Show More
itayc
USB Superspeed Peripherals
Hi, I'm looking for reference code to run MIPI interface of the AR0144 Demo 3 Head board with FX3. Will appreciate any assistance. Thanks, Itay Cohen Show More
_btylmz
USB Superspeed Peripherals
Hi,  I am working on a project with UVC hardware. I am taking the analog video data from an ADC with an FPGA and send the pixel data to USB FX3 chip. ... Show More
brjo_4790056
USB Superspeed Peripherals
I have followed several threads regarding this topic.  I see most of them end without clarification that "solutions "worked as there were follow up qu... Show More
rossihwang
USB Superspeed Peripherals
Hardware host: PC, ubuntu 20.04 slave: sg130gs(1280*720, YUYV, 30fps) + fpga(spartan 6) + cyusb3014, isochronous mode Problem Can't open t... Show More
More
USB Superspeed Peripherals
您好,请问FX3 有USB3.0 OTG HOST功能吗? 我司需要用MCU(STM32F4)高速采集AD数据,MCU把数据传给FX3 (CYUSB3014),FX3再通过USB3.0(速度需要大于12MByte/s)把二进制数据写入U盘,请问FX3可以完成这个单一功能的任务吗? 或者FX3 通过U... Show More