USB Superspeed Peripherals

cancel
Showing results for 
Search instead for 
Did you mean: 
Ask a question

Recent discussions

Sort by:
Philip
USB Superspeed Peripherals
Hello,We're trying to develop a custom module.However, we're facing several problems.let me explain our situation first.Our sensor has EMB data so out... Show More
IrAh_2291321
USB Superspeed Peripherals
When we are using the FX3 in development everything works fine. We have questions on switching over to our own VID/PID once we obtain a VID from USB-I... Show More
julius_kaluz
USB Superspeed Peripherals
Hi, In datasheet it is written that Fx3 should be capable to handle 50Mhz and 100MHz dataflow. We are able to do it only with 25MHz. Do you have an ex... Show More
Marc_O
USB Superspeed Peripherals
Hi, I'm working on a FX3 -> FPGA (Xilinx Artix 7) interface using the GPIFII interface. I went through all the AN65974 document (a wonderfull piece:),... Show More
NathanLE
USB Superspeed Peripherals
Hello !  I am actually working on Lattice USB3 video bridge devkit which used Cypress EZ-USB FX3.  I try to  download a firmware on it but I have an e... Show More
AnMc_4628076
USB Superspeed Peripherals
Is it possible to use the SX3 "backwards" to can stream USB3 data to the SX3, then have it output video signals (RGB888, VSYNC, HSYNC, PCLK)?  Alterna... Show More
tetsuya_o
USB Superspeed Peripherals
Hi,Our company want to resell FX3 driver(cyusb3.sys).According to "Cypress CyUsb3.sys Programmer's Reference", Companies need to contact Cypress Techn... Show More
MaMa_4520856
USB Superspeed Peripherals
Hello, During write transfer (Fx3 to PC), despite having full buffer (indicated by asserted DMA READY flag). After partial flag is asserted i keep wri... Show More
Minwan
USB Superspeed Peripherals
Hi, I am interfacing an Omnivision image sensor (OV9734) with the CX3 bridge . The image sensor and current cx3 receiver configuration are like below:... Show More
liuzhengxiang
USB Superspeed Peripherals

你好,目前ov5640给到cx3的数据是yuv格式的,请问cx3可以转换成mjpg视频流输出吗?